Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco 2600 Router Username

I am trying to determine the username for my router. Is there a default username? The previous person left the password but not the username.

4 REPLIES
Cisco Employee

Re: Cisco 2600 Router Username

By default, there is no username, just a password. Have you tried accessisng the router via the console port using the password that you have,

Hope this helps,

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
Anonymous
N/A

Re: Cisco 2600 Router Username

When I connect via hyperterminal the initial request is for a username: I tried all combinations of usernames.

Cisco Employee

Re: Cisco 2600 Router Username

Ralph,

You will need to perform the following password recovery procedure:

http://www.cisco.com/en/US/products/hw/routers/ps259/products_password_recovery09186a0080094675.shtml

For step 13, replace by the follwing commands:

router(config)#line con 0

router((config-line)#no login

Hope this helps,

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
Anonymous
N/A

Re: Cisco 2600 Router Username

Thank you for your help.

2486
Views
0
Helpful
4
Replies
CreatePlease to create content