Re: CISCO 2620

kwonza · ‎08-03-2003

Looking to upgrade IOS with latest release....running Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-DS-M), Version 12.0(5)XK1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC:Home:SW:IOS:Specials for info

Compiled Tue 14-Sep-99 15:45 by jjgreen

Image text-base: 0x80008088, data-base: 0x80CA9190

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

ROM: C2600 Software (C2600-DS-M), Version 12.0(5)XK1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

System image file is "flash:c2600-ds-mz.120-5.XK1.bin"

cisco 2620 (MPC860) processor (revision 0x101) with 39936K/9216K bytes of memory.

Processor board ID JAB032904AL (2367136889)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

1 FastEthernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

32K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash

It appears that with the latest release 12.3, there are several software feature sets, each having a recommended memory and flash size. Where can I find what does each feature set contains?

vincent-n · ‎08-03-2003

I've tried looking at the Cisco IOS Feature Navigator tool but cannot find your IOS in there. It's better to log a call with Cisco and ask for their recommendation.

hbaerten · ‎08-03-2003

The graphic on this page gives an overview of the feature sets:

http://www.cisco.com/warp/public/732/releases/packaging/

Use the IOS upgrade planner or Software Advisor at http://www.cisco.com/kobayashi/support/tac/tools_install.shtml to compare different packages and find out memory requirements.

hth

Herbert