Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco 3550 IOS Issue

3550 IOS image was deleted, could anyone please guide the steps to copy. the current status is:

switch: dir

List of filesystems currently registered:

flash[0]: (read-write)

xmodem[1]: (read-only)

null[2]: (read-write)

bs[3]: (read-only)

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Cisco 3550 IOS Issue

HI

Dear Aleem the command should be like this\

switch: copy xmodem: flash:c2955-i6q4l2-mz.121-13.EA1.bin

Begin the Xmodem or Xmodem-1K transfer now...

CCC

check my second url link ok.

Thanks

Mahmood

5 REPLIES
Community Member

Re: Cisco 3550 IOS Issue

Dear Mahmood,

still same problem, I tried with xmodem but the result is

switch: copy xmodem: C:/c3500xl-c3h2s-mz.120- 5.WC11.bin

Begin the Xmodem or Xmodem-1K transfer now...

CCBB0C:/c3500xl-c3h2s-mz.120-5.WC11.bin: permission denied

and the output of Transfer > "send file"

Transfer Cancelled by remote system.

please give another solution, expecting early reply.

Thanks,bye

Re: Cisco 3550 IOS Issue

HI

Dear Aleem the command should be like this\

switch: copy xmodem: flash:c2955-i6q4l2-mz.121-13.EA1.bin

Begin the Xmodem or Xmodem-1K transfer now...

CCC

check my second url link ok.

Thanks

Mahmood

Community Member

Re: Cisco 3550 IOS Issue

Mahmood bhai, Thanks for the Reply. that realy worked

I should not give the path of the file "\"

the command worked as you write but not as mentioned at link u send

switch: copy xmodem:flash:c3550-i9q3l2-mz.121-22.EA3

Thanks lot again. bye

Re: Cisco 3550 IOS Issue

HI

No probs dear its my pleasure to help u .

Mahmood

396
Views
2
Helpful
5
Replies
CreatePlease to create content