Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco 3750 Problem

Hi all,

I am have Cisco 3750 switch installed into my. Since I have installed this switch some of the switch ports leds are not glowing but the systems are up and they are using the network resources.

Could anybody tell what is it a problem with switch or network.

Regards,

Suresh

5 REPLIES

Re: Cisco 3750 Problem

Hi Suresh

Have you tried resetting the switch once ? also are you seeing any error logs in the switch ?

Whats the exact model in 3750 Switch you have installed over there?

regds

Community Member

Re: Cisco 3750 Problem

Prem,

I cannot reset the switch as it is live. I dont see any error logs. It is cisco WS-C3750G-48TS.

Regards

Re: Cisco 3750 Problem

Hi Suresh,

I think while installing the switch the mode button may have been pressed and hence the LEDS might not be showing any activity.

Try pressing the mode button and check to see if it works

HTH

Narayan

Community Member

Re: Cisco 3750 Problem

Hi all,

changing the use of the leds by pressing the

mode button is only a temporary condition and

should switch back to normal behavior after a

short period of time, isn't it ?

kind regards

chris

Hall of Fame Super Silver

Re: Cisco 3750 Problem

Hello chris,

I do think so too.

I think that in the password recovery procedure for this mid range IOS based LAN switches you have to work on these mode buttons in order to get the rommon prompt for example to delete a wrong file image from flash

HTH

gius

136
Views
0
Helpful
5
Replies
CreatePlease to create content