Currenlty I have 18 (6x3) GB ports blades in my Cisco 4006. I require approx 25 GB ports. What I need to know is if the WS-X4418-GB blade can support trunking ( pref the 802.1q encap) on its blocking ports and if the blocking ports can be connected to other internetworking devices such as a 2950G switch. Would this blade work in such an environment.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...