I have a Catalyst 4006 with a Supervisor III engine. I created a VLAN and gave it two IP addresses. CEF and routing are both turned on. If I try to ping from a machine on one subnet on the VLAN to another machine in a different subnet on the same VLAN, the ping times get extremely high, in the 1200 to 1500 millisecond range. What would cause this to happen?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...