Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Cisco 6506 CatOS unable to bootup

Hi,

I have a 6506 with SUP1, no MSFC running CatOS.

Module 1: Removed

Module 2: WS-X6K-SUP1A-2GE

Module 3: WS-X6348

Module 4: WS-X6348

Module 5: WS-X6408A-GBIC

Module 6: WS-X6408A-GBIC

However, it doesn't seems to be able to bootup properly.

Could this be an hardware issue?

What should I do?

System Bootstrap, Version 5.3(1)
Copyright (c) 1994-1999 by cisco Systems, Inc.
c6k_sup1 processor with 65536 Kbytes of main memory

Autoboot executing command: "boot bootflash:cat6000-sup.5-5-1.bin"

Uncompressing file:  ###########################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
#######################################


System Power On Diagnostics
DRAM Size ....................64 MB
Testing DRAM..................Passed
Verifying Text Segment .......Passed
NVRAM Size ...................512 KB
Saving NVRAM .................Done
Testing NVRAM ................Passed
Restoring NVRAM ..............Done
Level2 Cache .................Present
Testing Level2 Cache .........Passed

System Power On Diagnostics Complete

Boot image: bootflash:cat6000-sup.5-5-1.bin

=====Stopped Moving Here=====

5 REPLIES
Hall of Fame Super Gold

Cisco 6506 CatOS unable to bootup

Except for the Sup card, remove all the other line cards and try again.

Cisco 6506 CatOS unable to bootup

Just tried.

The results are the same.

Cisco 6506 CatOS unable to bootup

New Member

Cisco 6506 CatOS unable to bootup

hello I am just new here and quite curious of what's happening with your router...lol

the way i see it...it is indeed doing the POST process and nothing's wrong with the hardware...Though with the picture you attached...it is clear that it is solid green - meaning - it is on but not transmitting and recieving...

The snapshot indicated that once the IOS is loaded, it hanged... - maybe something is wrong with your IOS...better download one and do transfer using TFTP...

Hope im wrong...lol

Cisco 6506 CatOS unable to bootup

Brought the modules to a reseller.

Put it in their chassis... and it runs...

Console> (enable) sh ver

WS-C6506 Software, Version NmpSW: 5.5(1)

Copyright (c) 1995-2000 by Cisco Systems

NMP S/W compiled on Jun  8 2000, 21:09:45

System Bootstrap Version: 5.3(1)

Hardware Version: 3.0  Model: WS-C6506  Serial #: TBA05060101

Mod Port Model               Serial #    Versions

--- ---- ------------------- ----------- --------------------------------------

1   2    WS-X6K-SUP1A-2GE    SAD04210EJD Hw : 3.1

                                         Fw : 5.3(1)

                                         Fw1: 5.1(1)CSX

                                         Sw : 5.5(1)

                                         Sw1: 5.5(1)

         L3 Switching Engine SAD042305R2 Hw : 1.1

3   48   WS-X6348-RJ-45      SAD04250LF3 Hw : 1.1

                                         Fw : 5.3(1)

                                         Sw : 5.5(1)

5   48   WS-X6348-RJ-45      SAD041809EF Hw : 1.1

                                         Fw : 5.3(1)

                                         Sw : 5.5(1)

       DRAM                    FLASH                   NVRAM

Module Total   Used    Free    Total   Used    Free    Total Used  Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1       65408K  37935K  27473K  16384K   6925K   9459K  512K  201K  311K

Uptime is 0 day, 0 hour, 3 minutes

Console> (enable) sh mod

Mod Slot Ports Module-Type               Model               Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1   1    2     1000BaseX Supervisor      WS-X6K-SUP1A-2GE    yes ok

3   3    48    10/100BaseTX Ethernet     WS-X6348-RJ-45      no  ok

5   5    48    10/100BaseTX Ethernet     WS-X6348-RJ-45      no  ok

Mod Module-Name         Serial-Num

--- ------------------- -----------

1                       SAD04210EJD

3                       SAD04250LF3

5                       SAD041809EF

Mod MAC-Address(es)                        Hw     Fw         Sw

--- -------------------------------------- ------ ---------- -----------------

1   00-30-19-d8-eb-96 to 00-30-19-d8-eb-97 3.1    5.3(1)     5.5(1)

    00-30-19-d8-eb-94 to 00-30-19-d8-eb-95

    00-05-00-ac-cc-00 to 00-05-00-ac-cf-ff

3   00-b0-c2-f6-65-bc to 00-b0-c2-f6-65-eb 1.1    5.3(1)     5.5(1)

5   00-01-97-0e-27-f0 to 00-01-97-0e-28-1f 1.1    5.3(1)     5.5(1)

Mod Sub-Type                Sub-Model           Sub-Serial  Sub-Hw

--- ----------------------- ------------------- ----------- ------

1   L3 Switching Engine     WS-F6K-PFC          SAD042305R2 1.1

So the problem is either "me", or the chassis backplane.

Gonna bring the Chassis down for a check, just to be sure.

653
Views
0
Helpful
5
Replies
CreatePlease to create content