Brought the modules to a reseller.
Put it in their chassis... and it runs...
Router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-JSV-M), Version 12.1(8b)E15, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 17-Jul-03 19:52 by hqluong
Image text-base: 0x40008980, data-base: 0x4170A000
ROM: System Bootstrap, Version 12.1(11r)E1, RELEASE SOFTWARE (fc1)
BOOTFLASH: c6sup2_rp Software (c6sup2_rp-JSV-M), Version 12.1(8b)E15, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Router uptime is 2 minutes
System returned to ROM by power-on (SP by power-on)
System image file is "bootflash:c6sup12-jsv-mz.121-8b.e15"
cisco Catalyst 6000 (R7000) processor with 227328K/34816K bytes of memory.
Processor board ID SAD04420LNZ
R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3 Cache
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Virtual Ethernet/IEEE 802.3 interface(s)
96 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
381K bytes of non-volatile configuration memory.
32768K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
Router#sh mod
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 2 Cat 6000 sup 1 Enhanced QoS (Active) WS-X6K-SUP1A-2GE SAD05010NXB
3 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45 SAD04250LF3
5 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45 SAD041809EF
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0003.3282.4f3a to 0003.3282.4f3b 7.4 5.4(2) 6.2(2.113) Ok
3 00b0.c2f6.65bc to 00b0.c2f6.65eb 1.1 5.3(1) 6.2(2.113) Ok
5 0001.970e.27f0 to 0001.970e.281f 1.1 5.3(1) 6.2(2.113) Ok
Mod Sub-Module Model Serial Hw Status
--- --------------------------- --------------- --------------- ------- -------
1 Policy Feature Card WS-F6K-PFC SAD050206MX 1.1 Ok
1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAD04420LNZ 1.7 Ok
Router#dir slot0:
Directory of slot0:/
1 -rw- 28945 Jul 10 2004 08:49:01 sinb02-confg
2 -rw- 14600708 Jun 18 2000 03:17:24 c6sup12-jsv-mz.121-8b.e15
3 -rw- 1703448 Jun 18 2000 03:32:55 c6msfc2-boot-mz.121-8b.E15.bin
4 -rw- 27708 Jul 12 2004 11:03:13 sinb02-config-Jul12
24772608 bytes total (8411284 bytes free)
Router#dir bootflash:
Directory of bootflash:/
1 -rw- 1703448 Nov 28 2011 17:17:44 c6msfc2-boot-mz.121-8b.E15
31981568 bytes total (30277992 bytes free)
Router#dir sup
Router#dir sup-b
Router#dir sup-bootflash:
Directory of sup-bootflash:/
1 -rw- 14600708 Jun 04 2004 01:09:17 c6sup12-jsv-mz.121-8b.e15
2 -rw- 4067 Jun 04 2004 01:14:39 switch.cfg
15990784 bytes total (1385752 bytes free)
Router#
Router#sh mod 3
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
3 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45 SAD04250LF3
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
3 00b0.c2f6.65bc to 00b0.c2f6.65eb 1.1 5.3(1) 6.2(2.113) Ok
Router#sh mod 5
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
5 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45 SAD041809EF
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
5 0001.970e.27f0 to 0001.970e.281f 1.1 5.3(1) 6.2(2.113) Ok
So the problem is either "me", or the chassis backplane.
Gonna bring the Chassis down for a check, just to be sure.
Guess, I'll have to prepare for the worst.
