Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

Cisco 6509 Temperature

Hi,

i have got cisco 6509, in that how do i see the temperature status? because recently when there is a power down on the server room for more than 3 hrs, cisco 6509 temperature has exceed more than 40C, so that all the LED's in the sup2 has become AMPER indications, so when i went & saw the log, it has displaed temperature exceeded the maximum threshold & current temp. 50C. so how do i see the current temperature in the cisco 6509 & also how do i change the threshold value of the temperature?

1 REPLY

Re: Cisco 6509 Temperature

Hi Anand,

To check the temp status on cat6k switch just run the command

sh env all

to be more specific

sh env temperature

Have a look at this link for more details

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_1/cmd_ref/sh_d_i.htm#wp1175721

AFAIK you cannot change the threshold value.

HTH, if yes please rate the post.

Ankur

960
Views
5
Helpful
1
Replies
CreatePlease to create content