Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

cisco 805 traffic shaping on access lists

i'm trying to throttle the bandiwdth useage on a cisco 805 with ios 12.0(7)T. one access list should be allowed, say 50% of the bandwidth (outgoing and incoming) while the other access list allocated the other 50%.

is this possible, and how so?

our speed is 64k and the router is used for the internet leased line.

thanks for all feedback.

kaushal

1 REPLY
Community Member

Re: cisco 805 traffic shaping on access lists

This will tell you how to configure it if the 805 platform supports traffic shaping: http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/qos_c/qcpart4/qcgts.htm

189
Views
0
Helpful
1
Replies
CreatePlease to create content