I have an 806 that I'm using to hook up to a cable modem and to VPN to the home office. I found that under the dhcp options if you use import all, you receive the dns server of the provider. However, if you code dns-server x.x.x.x for vpn purposes, this appears to override the import all. Is there anyway to get the best of both worlds so that you can both them providers dns and the one being used for vpn
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...