Cisco 827 Router Remote access Help

[maruti]

Dear All,

We are using the Cisco 827 Router,ADSL connection for our LAN. Now we would like to access the Office PC from Remote location.

Your kind response as to how we could be able to achieve it will be greatly appreciated.

Thank you

Maruti

[n.elms]

You will need to configure NAT as you need to connect to your private (host) address via an internet address. This configuration link may help:

http://www.cisco.com/en/US/partner/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml#topic6

Make sure you also secure this as you do not want to leave access open to everyone.

-Neale