I have a Cisco 831 Router with a Nokia 30 Connectivity Terminal connected trough AUX interface. Can anyone have a modemcap for this kind of modem. I try to make my modemcap that work find but I have problems whit detection of speed between the modem and router. I have to restart the modem many times for good negotiation and detection of the speed.
My modemcap is: "modemcap entry GPRS:SPD=+IPR=38400:DTE=38400:MSC=&FV1E0&D2&S0&C1S0=0"
Thanks for your answer. Now I get another problem. Everything works fine but sometimes I lost the connectivity with the GPRS Network. I set the "dialer persistent" to dialer profile, but it's not comme up. When I restart the modem, it works. From logs I sow that router receive TTY1: DSR was dropped. What is the problem?
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...