I am using a Cisco 837 ADSL router. When I download files, the size of the downloaded files is correct. But when I execute them, it display error. This problem occurs to all the files that I have downloaded. When I switch to another router Cisco 1700 running lease line, I can download the same files and execute them successfully.
What files are you talking about? If it is Cisco IOS images, after downloading you must verify the "checksum" with that given in the Cisco Web site from where you can download the images. Note down the BSD checksum and Router Checksum and verify them after loading the images in the router before using them. Same checksum verifies that the files have been copied without any errors.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...