Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cisco 877w - Configuration help !!!

Hi,

I just bought a cisco 877w(UK)model. IOS is c870-advsecurityk9-mz.123-8.YI1.bin version. I need the following

1. Able to use lan ports x4 - on dhcp - to access internet

2. NAT enabled

3. WLAN - to access internet

4. Firewall enabled for internet access, ftp. all else block access (inbound)

What ip addressing scheme should I be using and how to configure it through CLI or SDM.

Your help will be of very great help.

Thankyou

1 REPLY
VIP Purple

Re: Cisco 877w - Configuration help !!!

Hello,

have a look at the document below, it contains a sample configuration. You might not need or want the VPN part. Regarding the IP addressing, it does not really matter which address space you are using, since you will be using NAT anyway; so you could use e.g. 192.168.1.0/24.

Cisco 877 Sample Configuration

http://www.cisco.com/en/US/products/hw/routers/ps380/products_configuration_guide_chapter09186a008045d279.html

HTH,

GP

112
Views
0
Helpful
1
Replies
CreatePlease to create content