I installed a wireless network using CISCO AIRONET 1200 APs and presently accessing AP through Internet browser using plain text password. I would like to know if there is any way I could implement TACACS+ authentication to get access to AP.
Yes, you can configure a TACACS+ or Radius server such as Cisco ACS. On the AP web menu goto Setup. On the Services Windows choose ---> Security --> Authentication server. You have to choose if it is TACACS or Radius. Use the IP address of the Authentication server and a share secret that you configure on the server and on the AP (they have to match). The default port for Cisco ACS is 1645. Take a look at the 1200 security set up on the 1200 software configuration guide.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...