Cisco c6000

[chrishop]

I am trying to set up the following (Newbie):

fastethernet0/0 193.xxx.xxx.46

fastethernet0/1 172.xxx.xxx.1

The default gateway was set to 193.xxx.xxx.1

From the 193.xxx.xxx.xxx/24 subnet I can ping eth0/0 and thats it, but from 172.xxx.xxx.xxx I can ping both eth0/0 and eth0/1, what I would like is to have unrestricted access between subnets.

Any ideas or links for newbie howto's would be great.

Many Thanks

Chris

[Georg Pauwen]

Hello Chris,

you mention only one default gateway, are both clients on both subnets using their respective default gateways (the IP addresses of FastEthernet0/0 and FastEthernet0/1 respectively) ?

Regards,

Georg

[chrishop]

Dear Georg

The primary gateway for all our internet services i.e. proxy connections and novell email systems is based around 193.xxx.xxx.1 if using mutiple gateways will solve this then yes I would try the default gateways for each subnet.

Hope that makes sense.

Chris