Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

cisco cat 3560 service-policy output problem

I have just use the 3560 to replace 3550 switchs, but the cat3560 does not support the command "service-policy output" which was supported by 3550,

we have already use this command in 3550 to control the network traffic.

so there somebody knows if there an schedule to implement this command?

Thank you very much.

3 REPLIES
Silver

Re: cisco cat 3560 service-policy output problem

What software image is the switch running? It's likely that it does not support PBR.

Cisco Employee

Re: cisco cat 3560 service-policy output problem

"service-policy output" is not supported in 3560/3750 due to ASIC limitation. See if "srr-queue bandwidth limit" command will work for you

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12225sed/scg/swqos.htm#wp1253412

Community Member

Re: cisco cat 3560 service-policy output problem

Thank you for you reply.

The srr-queue can't help me,for I need the rate limit like 512Kbps or 1024Kbps, only 3550 offers this feature.

I don't know why 3560 does not support this feature.

788
Views
0
Helpful
3
Replies
CreatePlease to create content