Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco Catalyst 6504 : Radius Module not initialized

I am trying to get Radius work on our cisco machines. However when i debug i get this message "Radius Module not initialized".

What am i missing, a piece of the config is entered below :

aaa new-model

aaa group server radius TEST-Radius

server 192.168.140.15 auth-port 1645 acct-port 1646

!

aaa authentication banner ^CC This is the Authentication Banner ^C

aaa authentication fail-message ^CC This is the Authentication Fail Message ^C

aaa authentication password-prompt "Please enter your TEST password"

aaa authentication login TEST-Auth group TEST-Radius local

aaa authorization exec TEST-Auth group TEST-Radius if-authenticated

aaa authorization command 15 TEST-Auth group TEST-Radius if-authenticated

radius-server source-ports 1645-1646

radius-server key PASSWORD

line vty 0 4

password telnetpassword

login authentication TEST-Auth

What am i missing or what can i debug to solve this ?

Regards

Sebastian

  • Other Network Infrastructure Subjects
3 REPLIES
Anonymous
N/A

Re: Cisco Catalyst 6504 : Radius Module not initialized

configuring radius with aaa, without a radius server configuration could cause the issue.I find radius-server host x.x.x.x auth-port cccc acct-port cccc, radius-server host x.x.x.x auth-port cccc acct-port cccc

New Member

Re: Cisco Catalyst 6504 : Radius Module not initialized

It seems to work, i'll test it further on.

However i don't understand because i thought the configuration like below was enough..

aaa group server radius TEST-Radius

server 192.168.140.15 auth-port 1645 acct-port 1646

New Member

Re: Cisco Catalyst 6504 : Radius Module not initialized

Hi All,

Is this problem got resolved for u.

I am facing the exactly the same problem.

"Radius Module not initialized.

Thanks in Advance.

413
Views
0
Helpful
3
Replies
This widget could not be displayed.