Cisco IOS router support destination NAT?

[wmmak]

Hi all,

May I know whether Cisco IOS router can support destination NAT or not from outside to inside? If so, is there any example to show the configuration?

Thanks a lot in advance.

Regards,

mak

[ankurbhasin]

Hi Mak,

AFAIK "ip nat outside destination" is not supported in cisco ios.

BUT "ip nat inside destination" is supported and you can play with this command using "ip nat inside" command on serial interface and "ip nat outside" on lan interfaces.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipras_r/1rfipadr.htm#wp1019118

HTH, if yes please rate the post

Ankur