Cisco LRE capabilities question

[ron_reed]

Don't know which discussion forum best matches this question, but here's my question: We have an outlying building we want to tie into our main network in another building. I'm looking at the Cisco 2900 LRE series switch and CPE LRE hardware to run Ethernet over existing buried copper.

The problem is that the outlying building is 10K ft away, far beyond the 5K ft limits. Is there a way, perhaps using another pair of Cisco 2900 LRE and CPE LRE devices, to provide a "hop" at the 5K ft location to reach this building? Something like a 2912 LRE at the main building, a CPE LRE and 2912 LRE at the 5K ft spot, and then a CPE LRE at the outlying building.

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you, or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources at the online http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.