Hi All, our RNM guys are complaining about the amount of traps their HP Openview machine is receiving from our Cisco routers. They would like assistance to be either told what MIB to use or if there is a web site that one can go to. I've pasted a section of the offending trap. Whatever assistance will be much appreciated ...
- Normal Wed Dec 12 10:47:05 10.0.1.254 Received event .184.108.40.206.220.127.116.11.1 (enterprise:.18.104.22.168.4.1.9 generic:6 specific:1), no format in trapd.conf. 6 args:  private.enterprises.cisco.22.214.171.124.1.131.1 (Integer): 5  mgmt.mib-2.tcp.tcpConnTable.tcpConnEntry.tcpConnState.10.64.3.3.65126.96.36.199.4.23 (Integer): finWait2  private.enterprises.cisco.188.8.131.52.184.108.40.206.3.65220.127.116.11.4.23 (Integer): 130386  private.enterprises.cisco.18.104.22.168.22.214.171.124.3.65126.96.36.199.4.23 (Integer): 66531  private.enterprises.cisco.188.8.131.52.184.108.40.206.3.65220.127.116.11.4.23 (Integer): 444  private.enterprises.cisco.18.104.22.168.18.131 (OctetString):
Hi Michael/Jim, our RNM guy has been to to the MIB Central site initially but could not find these traps.
Michael, I've gone to the URL you suggested & when I selected to view the TRAPS section a search was performed which then timed out. I tried this many times but always with the same result. Am I doing something wrong?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...