Cisco switch 2900XL Input and Frame Errors

[jgascon]

What is 2224 input errors and 2224 Frame errors on my Cisco Switch. Is this a cisco IOS bug?

My current IOS is 12.0(5)WC3B on 2900XL switch

FastEthernet0/37 is up, line protocol is up

Hardware is Fast Ethernet, address is 0007.5091.05e5 (bia 0007.5091.05e5)

Description: WinSvr2k

MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,

reliability 255/255, txload 1/255, rxload 3/255

Encapsulation ARPA, loopback not set

Keepalive not set

Full-duplex, 100Mb/s, 100BaseTX/FX

ARP type: ARPA, ARP Timeout 04:00:00

Last input never, output 00:00:00, output hang never

Last clearing of "show interface" counters 5d22h

Queueing strategy: fifo

Output queue 0/40, 0 drops; input queue 0/75, 0 drops

30 second input rate 1436000 bits/sec, 251 packets/sec

30 second output rate 691000 bits/sec, 230 packets/sec

93394039 packets input, 2149647415 bytes

Received 487023 broadcasts, 0 runts, 0 giants, 0 throttles

2224 input errors, 0 CRC, 2224 frame, 0 overrun, 0 ignored

0 watchdog, 0 multicast

0 input packets with dribble condition detected

53654189 packets output, 3879041418 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

0 babbles, 0 late collision, 0 deferred

0 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out

[prafuljaded]

My Friend,

Its not an IOS bug. Try changing the switch port to some other port. Or it may be a problem with the PC connected to the port (NIC problem).

This might help u...

http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/tr1904.htm

[Tsasbrink]

I suggest you fix all speed settings, these kind of errors are very common, looking at the percentage (0.02) it seems like there is nothing to realy worry about because these kind of errors can be caused by power glitches and all other kinds of emi sources.