01-07-2006 01:18 AM - edited 03-03-2019 01:21 AM
Dear NetPro,
Does anyone knows how to apply RMON into the switch port ?
Regards,
Jack
Solved! Go to Solution.
01-07-2006 09:27 PM
Hi Jack,
Yes you can configure RMON on cat4k and cat6k switches.
Here you go with the link how to go ahead with the same
If you have cat4k with CATOS
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/7_5/config/rmon.htm#14639
If you have cat6k with CATOS
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_4/confg_gd/rmon.htm
HTH
Ankur
01-07-2006 01:36 AM
Hi Jack,
This link will help you how to configure RMON on 2950 switch ports.
HTH
Ankur
01-07-2006 04:55 PM
Hi Ankur,
Thanks for reply, can RMON apply to Cat4k Series and Cat6k Series as well ?
Regards,
Jack
01-07-2006 09:27 PM
Hi Jack,
Yes you can configure RMON on cat4k and cat6k switches.
Here you go with the link how to go ahead with the same
If you have cat4k with CATOS
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/7_5/config/rmon.htm#14639
If you have cat6k with CATOS
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_4/confg_gd/rmon.htm
HTH
Ankur
01-09-2006 08:45 PM
Hi Ankur,
Thank you so much.
Regards,
Jack
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide