Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco Switch RMON

Dear NetPro,

Does anyone knows how to apply RMON into the switch port ?

Regards,

Jack

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Cisco Switch RMON

Hi Jack,

Yes you can configure RMON on cat4k and cat6k switches.

Here you go with the link how to go ahead with the same

If you have cat4k with CATOS

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/7_5/config/rmon.htm#14639

If you have cat6k with CATOS

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_4/confg_gd/rmon.htm

HTH

Ankur

4 REPLIES

Re: Cisco Switch RMON

Hi Jack,

This link will help you how to configure RMON on 2950 switch ports.

http://www.cisco.com/en/US/products/hw/switches/ps628/products_configuration_guide_chapter09186a00804762c1.html#wp1022307

HTH

Ankur

New Member

Re: Cisco Switch RMON

Hi Ankur,

Thanks for reply, can RMON apply to Cat4k Series and Cat6k Series as well ?

Regards,

Jack

Re: Cisco Switch RMON

Hi Jack,

Yes you can configure RMON on cat4k and cat6k switches.

Here you go with the link how to go ahead with the same

If you have cat4k with CATOS

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/7_5/config/rmon.htm#14639

If you have cat6k with CATOS

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_4/confg_gd/rmon.htm

HTH

Ankur

New Member

Re: Cisco Switch RMON

Hi Ankur,

Thank you so much.

Regards,

Jack

323
Views
0
Helpful
4
Replies