Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cisco switches 6503 ATA cards not working

I have a Cisco switches 6503 with supervisor MSFC2, IOS version 12.2, pcmcia ATA card 64 Mb, rommon 7.1(1)..

File installed cat6000-sup2k8.7-2-2.bin

And when I try to copy the IOS in the ATA card, or format the ATA card:

Format slot0:

Or

Format disk0:

The switch can’t copy or format on the ATA card.

And that’s happened in 2 switches with 2 different Supervisor and different ATA cards.

Other think, When I type the show version, I can’t see information about the ATA cards.

What’s wrong?

the PN. is MEM-C6K-ATA-1-64=

That's

Happened when I try to format

Console> (enable) format disk0:

All sectors will be erased, proceed (y/n) [n]? y

Enter volume id (up to 31 characters): test

Format device disk0 failed (unknown device)Console> (enable)

Console> (enable) format slot0:

All sectors will be erased, proceed (y/n) [n]? y

Enter volume id (up to 31 characters): test

Unknown device mfg id (5d.75.ffffffea)error = -1

Format device slot0 failed (unspecified error)Console> (enable)

Console> (enable)

that's the

show version

PS2 Module: PWR-950-AC Serial #: ABC07496185

Mod Port Model Serial # Versions

--- ---- ------------------- ----------- --------------------------------------

1 2 WS-X6K-SUP2-2GE SAL0752R7UE Hw : 5.0

Fw : 7.1(1)

Fw1: 6.1(3)

Sw : 7.4(3)

Sw1: 7.4(3)

WS-F6K-PFC2 SAL0752R764 Hw : 3.4

2 16 WS-X6516-GBIC SAL0723EHCA Hw : 5.5

Fw : 6.3(1)

Sw : 7.4(3)

15 1 WS-F6K-MSFC2 SAL0749QBR6 Hw : 2.6

Fw : 12.1(19)E1

Sw : 12.1(19)E1

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 131072K 58516K 72556K 32768K 7629K 25139K 512K 265K 247K

Uptime is 0 day, 0 hour, 45 minutes

Console> (enable)

Right now, I'm not sure that the switch had the good version of ronmon.

And I found some more:

if I remove the ATA card in hot. the router display the fact, and if I re-insert the card, the same happened

I removed the module 2. (faster than upgrade) and I still have the problem with the ATA card.

Many thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Cisco switches 6503 ATA cards not working

Software version 7.5(1). You are currently running 7.4(3). 7.6(5) is the way to go. You can dowload the file from

http://www.cisco.com/cgi-bin/tablebuild.pl/cat6000-sup

3 REPLIES
Cisco Employee

Re: Cisco switches 6503 ATA cards not working

You need 7.5(1) or higher for your ATA card support

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_1982.htm#379543

7.6(5) is the way to go

New Member

Re: Cisco switches 6503 ATA cards not working

Version 7.5(1) of what? There ara too much versions on the sh ver . I think the Fw : 7.1(1) is the ronmon version, and that version it' fine.

You mean Sw : 7.4(3), what is that version?

Many Thanks

Cisco Employee

Re: Cisco switches 6503 ATA cards not working

Software version 7.5(1). You are currently running 7.4(3). 7.6(5) is the way to go. You can dowload the file from

http://www.cisco.com/cgi-bin/tablebuild.pl/cat6000-sup

108
Views
0
Helpful
3
Replies
CreatePlease to create content