Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco Voice Manager

we have succesfuly installed the CVM over CISCOWORKS2000 with the default ports : 1000,1001,162 respectively for server port, poller port and traps port.

the problem is that when running CVM module in CISCOWRKS2000 we are anable to log to the CVM server. the error message is : no CVM running in CVM host/port.

waiting for your reply.

thans for your collaboration.


Re: Cisco Voice Manager

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center ( or speak with a TAC engineer. You can open a TAC case online at

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.