Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

[Cisco837] Acess from external

Hi,

Is it possible that Cisco Router 837 permit access to two internat server 192.168.1.50 and 192.168.1.51 in the same port (For exemple 8080) but for two different server inj DMZ from external?

Important : I have one IP adresse in ADSL line

Thanks in advance

2 REPLIES
Purple

Re: [Cisco837] Acess from external

Hi,

You can do the following:

- map incoming sessions to port 8080 of your public IP to 192.168.1.50 port 8080

- map incoming sessions to port 8081 (thats an example, you can yse any other port) to 192.168.1.51 port 8080.

The thing here is that you will need to use two external ports, both of which can map to the same port 8080 on two different servers.

Hope that helps - pls rate the post if it does.

Paresh

New Member

Re: [Cisco837] Acess from external

Hi,

Thanks for your reply.

In fact, I want to delete a LS (with a range of public IP adresse) and use ADSL line : Use an external IP for the router Cisco 837 and NAT seven servers behind the router (In internal) with many port (80,81,..,8080,8081).

The solution above,is-it also valid?

Many thans in advnce

91
Views
0
Helpful
2
Replies
CreatePlease login to create content