Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CiscoView: Error when monitoring

Hi Forum,

I get the following error message when I try to monitor a 3600 router: "No such instance error on dsx1 CurrentCSSs.4"

We've got some other 3600 devices in our network, but only one of them is reporting this problem. Configuration, agents, patchs.., everything seems to be working fine, so I don't know how it comes nor how it can be fixed.

Please, any idea? Thanks in advance!

6 REPLIES
Blue

Re: CiscoView: Error when monitoring

What is the version of CiscoView that you're using?. Make sure that you have installed the latest v15.0 device package for your 3600 in CiscoView from:

http://www.cisco.com/cgi-bin/Software/CiscoView/cvplanner.cgi

New Member

Re: CiscoView: Error when monitoring

Sorry, I forgot to mention it: CiscoView 5.4 The Active Device Package that we've got running right now on our routers 3600 is version 14.0. But this problem with monitoring only happens with one router, the rest seems to be working properly and under the same conditions. So I'm actually not sure that upgrading the system with v15.0 package could fix this error.

But well, you are the experts... :-) Please let me know what you think about it... Thanks again!

Blue

Re: CiscoView: Error when monitoring

You still may want to upgrade the CV device package to see if it helps. This will atleast eliminate that this issue is not due to the device package. And it's always recommended to have the latest device packages for the devices that you're managing via CV anyway.

New Member

Re: CiscoView: Error when monitoring

Hi,

First of all, thanks for your advice. I've just upgraded the device version, and the problem stays the same. What do you think it's going wrong yet?

Thanks again, regards

Blue

Re: CiscoView: Error when monitoring

I'd suggest that you contact TAC to troubleshoot this problem further.

New Member

Re: CiscoView: Error when monitoring

Ok, i'll do that. Thanks for your attention!

Regards

121
Views
0
Helpful
6
Replies
CreatePlease to create content