I have installed CiscoWorks 2000 CD one 4th edition and Campus Manager 3.1. I also have the RME and DFM options. I am having problems with it. I'm guessing they are all related. I had it working before but ran into problems and in the troubleshooting process removed it and reinstalled and now I can not get back to the point I was at before.
1. My CiscoView 5.3 will not access the router (3660). It gives an error reporting bad device package or trying to open a subinterface --open the parent equipment instead. I am using the ethernet interface as the IP address. I reinstalled hoping it was a bad package installation, but no luck--still bad I was going to download a new software package, but my account does not allow software downloads.
2. Also my Campus Manager will not show hostnames in UserTracking. If I understand correctly, It uses the router to obtain that information so it seems to point back to question #1.
For 1) above, have you made sure that you have the latest 3600 device package installed from CCO?. If not, you can contact TAC to get it. Also, you have to make sure that the SNMP Community strings configured on the device match exactly that in CiscoView, otherwise CV will not be able to contact the device properly.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...