Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CiscoWorks 2000

after loading 5th edition software CW does not load, cannot even start the daemon manager, also got error msg port dd(dbport6) build number mismatch, any idea?

6 REPLIES
Blue

Re: CiscoWorks 2000

What exactly happens when you try to start the daemon manager?. Is this a Fresh install or an upgrade?. What is the OS and Service Pack installed?. Any other applications installed on the same server with CW2K?. Are you able to get to the login screen?

New Member

Re: CiscoWorks 2000

This was an upgrade to 5th edition, running on Windows 2000 server SP2, no other apps on server just Cisco Works. Problem seems to be starting the Cisco Works Daemon under the services option.

New Member

Re: CiscoWorks 2000

This was an upgrade to 5th edition, running on Windows 2000 server SP2, no other apps on server just Cisco Works. Problem seems to be starting the Cisco Works Daemon under the services option.Do not even get the login screen for Cisco Works.

Have tried starting the daemon via DOS but still not good

net start crmdgtd

Blue

Re: CiscoWorks 2000

Does the install log show any error messages?. This could be due to CSCdx84744 which you can see via CCO Bug Tookit.

New Member

Re: CiscoWorks 2000

Log attached, -

Setup log file on this date 11-30-2002

MAIN: SetupInstall START at 18:01:57

Normal mode installation, TAGS=rme rmeids

INFO-OVERRIDE: C:\DOCUME~1\Siemens\LOCALS~1\Temp\CW2K.install file not found, normal installation mode

MAIN: SetupInstall END at 18:02:01

Installing Resource Manager Essentials

GetServiceState for HP OpenView Process Manager returned 0

This installation requires cdone to be pre-installed.

INFO: comparing the version of installed package cdone (2.1.0) to 2.1.0

INFO: [CheckSSL] This is CDONE 2.1. There will be ssl.properties

MAIN: CallTocHooks START upgrade at 18:02:02

Executing INIT hooks

MAIN: CallTocHooks END upgrade at 18:02:02

MAIN: ShowDialogs START at 18:02:02

INFO: NMSROOT already set

INFO: have component choice

MAIN: ShowDialogs END at 18:02:05

MAIN: ProcessBeforeConfirmation START at 18:02:05

Executing command:

"D:\dependency\jre\bin\jrew_dep.exe" -cp "D:\dependency" -nojit DependencyHandler "C:\CSCOpx\setup" C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\Depends.in

-------------Checking if import from BG required-------------

BG_DATA_STORE_DIR not found, import from BG not needed

MAIN: ProcessBeforeConfirmation END at 18:02:13

MAIN: ProcessBeforeDiskSpaceCheck START at 18:02:15

------------------ Memory Information -------------

GlobalMemoryStatus: totalPhys = 1073246208(1023M), totalPageFile = -1712951296(-1633M)

Paging Files:

C:\pagefile.sys 1536 3072

Total Paging files: initial = 1536M, maximum = 3072M

MESSAGE

Installer has verified the following on your system:

- Sufficient CPU

- Sufficient memory (RAM)

- Sufficient paging file

4 G disk space is recommended for this product.If you want to install other applications after installing

Resource Manager Essentials please check the system requirements for those products.

***Executing preinstall hooks

CallScript START PREINSTALL: rme at 18:02:21

HOOK: START at 18:02:25

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

getting property NAME from property list ..., found: Resource Manager Essentials Incremental Device Support

getting property NAME from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\rmeids.info..., done

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:02:25

CallScript END PREINSTALL: rme at 18:02:25

CallScript START PREINSTALL: adv_inv at 18:02:27

HOOK: START at 18:02:32

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

getting property INSTDATE from property list ..., found: 11-30-2002 18:01:58

getting property INSTDATE from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\adv_inv.info..., done

getting property PREV_VERSION from property list ..., found: 3.3

getting property PREV_VERSION from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\adv_inv.info..., done

getting property PREV_PATCHVER from property list ..., found: 0

getting property PREV_PATCHVER from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\adv_inv.info..., done

INFO: comparing the version of installed package adv_inv (3.3.0) to 3.4.0

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property bInstallingPkgFirstTime=NO into property List ..., adding property done

setting property bInstallingPkgFirstTime=NO into C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\adv_inv.info..., done

QUESTION:

For security reasons

Cisco recommends that you change the default Password for RME Database.

Do you want to Change RME Database Password ?

USER ANSWER: NO

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:02:40

CallScript END PREINSTALL: adv_inv at 18:02:40

CallScript START PREINSTALL: cfgt at 18:02:42

HOOK: START at 18:02:47

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:02:47

CallScript END PREINSTALL: cfgt at 18:02:47

CallScript START PREINSTALL: config at 18:02:49

HOOK: START at 18:02:53

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:02:53

CallScript END PREINSTALL: config at 18:02:53

CallScript START PREINSTALL: ncft at 18:02:55

HOOK: START at 18:03:00

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for ncft package

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:03:00

CallScript END PREINSTALL: ncft at 18:03:00

CallScript START PREINSTALL: swim at 18:03:02

HOOK: START at 18:03:07

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

checking version of installed swim package

getting property INSTDATE from property list ..., found: 11-30-2002 18:02:00

getting property INSTDATE from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\swim.info..., done

getting property PREV_VERSION from property list ..., found: 3.3

getting property PREV_VERSION from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\swim.info..., done

getting property PREV_PATCHVER from property list ..., found: 0

getting property PREV_PATCHVER from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\swim.info..., done

Found 3.3 version of swim package

job test not needed

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:03:07

CallScript END PREINSTALL: swim at 18:03:07

CallScript START PREINSTALL: avail at 18:03:09

HOOK: START at 18:03:13

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:03:13

CallScript END PREINSTALL: avail at 18:03:13

CallScript START PREINSTALL: sysloga at 18:03:16

HOOK: START at 18:03:20

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

INFO: Registering the script C:\CSCOpx/conf/bg2rigel/rme/scripts/m05000sa.pl

getting property INSTDATE from property list ..., found: 11-30-2002 18:02:00

getting property INSTDATE from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\sysloga.info..., done

getting property PREV_VERSION from property list ..., found: 3.3

getting property PREV_VERSION from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\sysloga.info..., done

getting property PREV_PATCHVER from property list ..., found: 0

getting property PREV_PATCHVER from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\sysloga.info..., done

INFO: comparing the version of installed package sysloga (3.3.0) to 3.4.0

INFO: Registering the script C:\CSCOpx/dbupdate/common/m05001sa.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:03:20

CallScript END PREINSTALL: sysloga at 18:03:20

CallScript START PREINSTALL: show at 18:03:22

HOOK: START at 18:03:27

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

getting property INSTDATE from property list ..., found: 11-30-2002 18:02:00

getting property INSTDATE from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\show.info..., done

getting property PREV_VERSION from property list ..., found: 3.3

getting property PREV_VERSION from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\show.info..., done

getting property PREV_PATCHVER from property list ..., found: 0

getting property PREV_PATCHVER from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\show.info..., done

INFO: comparing the version of installed package show (3.3.0) to 3.4.0

C:\CSCOpx\bin\cwjava -cw "C:\CSCOpx" -cp:p "C:\CSCOpx\www\classpath;C:\CSCOpx\lib\classpath;D:\NetShowUpgrade.jar" com.cisco.nm.netshow.batch.HandleNSJobs ToCm "C:\CSCOpx\files\jobs\netshow" "C:\CSCOpx\temp"

Executing as LSAW.cmd:

C:\CSCOpx\bin\cwjava -cw "C:\CSCOpx" -cp:p "C:\CSCOpx\www\classpath;C:\CSCOpx\lib\classpath;D:\NetShowUpgrade.jar" com.cisco.nm.netshow.batch.HandleNSJobs ToCm "C:\CSCOpx\files\jobs\netshow" "C:\CSCOpx\temp"

Executing command:

/x /c "C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\LSAW.cmd" > C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\NetShowJobsUpgrade1.txt 2>&1

-----NetShow Jobs Upgrade

INFO:NetShow:HandleNSJobs C:\CSCOpx\files\jobs\netshow not a directory/not Exists

java.lang.NullPointerException

at com.cisco.nm.netshow.batch.HandleNSJobs.createJobs(HandleNSJobs.java, Compiled Code)

at com.cisco.nm.netshow.batch.HandleNSJobs.main(HandleNSJobs.java:164)

----- end of NetShow Jobs Upgrade

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:03:32

CallScript END PREINSTALL: show at 18:03:32

CallScript START PREINSTALL: rvpn at 18:03:34

HOOK: START at 18:03:38

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:03:38

CallScript END PREINSTALL: rvpn at 18:03:38

CallScript START PREINSTALL: rmeids at 18:03:41

HOOK: START at 18:03:45

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

getting property TAGS from property list ..., found: invids confids nshowids swids

getting property TAGS from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\rmeids.info..., done

getting property NAME from property list ..., found: Inventory Incremental Device Support

getting property NAME from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\invids.info..., done

getting property NAME from property list ..., found: Configuration Incremental Device Support

getting property NAME from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\confids.info..., done

getting property NAME from property list ..., found: Network Show Commands Incremental Device Support

getting property NAME from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\nshowids.info..., done

getting property NAME from property list ..., found: Software Management Incremental Device Support

getting property NAME from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\swids.info..., done

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:03:45

CallScript END PREINSTALL: rmeids at 18:03:45

CallScript START PREINSTALL: mib at 18:03:47

HOOK: START at 18:03:52

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for mib package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:03:52

CallScript END PREINSTALL: mib at 18:03:52

CallScript START PREINSTALL: inbdv at 18:03:54

HOOK: START at 18:03:58

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for inbdv package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:03:58

CallScript END PREINSTALL: inbdv at 18:03:58

CallScript START PREINSTALL: incsv at 18:04:00

HOOK: START at 18:04:05

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for incsv package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:04:05

CallScript END PREINSTALL: incsv at 18:04:05

CallScript START PREINSTALL: incts at 18:04:07

HOOK: START at 18:04:11

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for incts package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:04:12

CallScript END PREINSTALL: incts at 18:04:12

CallScript START PREINSTALL: intsi at 18:04:14

HOOK: START at 18:04:18

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for intsi package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:04:18

CallScript END PREINSTALL: intsi at 18:04:18

CallScript START PREINSTALL: inctn at 18:04:20

HOOK: START at 18:04:25

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for inctn package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:04:25

CallScript END PREINSTALL: inctn at 18:04:25

CallScript START PREINSTALL: incat at 18:04:27

HOOK: START at 18:04:31

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for incat package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:04:32

CallScript END PREINSTALL: incat at 18:04:32

CallScript START PREINSTALL: incom at 18:04:34

HOOK: START at 18:04:38

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for incom package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:04:38

CallScript END PREINSTALL: incom at 18:04:38

CallScript START PREINSTALL: incon at 18:04:40

HOOK: START at 18:04:45

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for incon package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:04:45

CallScript END PREINSTALL: incon at 18:04:45

CallScript START PREINSTALL: infhb at 18:04:47

HOOK: START at 18:04:51

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for infhb package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:04:51

CallScript END PREINSTALL: infhb at 18:04:52

CallScript START PREINSTALL: infrw at 18:04:54

HOOK: START at 18:04:58

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for infrw package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:04:58

CallScript END PREINSTALL: infrw at 18:04:58

CallScript START PREINSTALL: infsw at 18:05:00

HOOK: START at 18:05:05

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for infsw package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:05:05

CallScript END PREINSTALL: infsw at 18:05:05

CallScript START PREINSTALL: infsm at 18:05:07

HOOK: START at 18:05:11

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for infsm package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:05:11

CallScript END PREINSTALL: infsm at 18:05:11

CallScript START PREINSTALL: inisw at 18:05:14

HOOK: START at 18:05:18

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for inisw package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:05:18

CallScript END PREINSTALL: inisw at 18:05:18

CallScript START PREINSTALL: inlsw at 18:05:20

HOOK: START at 18:05:24

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for inlsw package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:05:25

CallScript END PREINSTALL: inlsw at 18:05:25

CallScript START PREINSTALL: inltn at 18:05:27

HOOK: START at 18:05:31

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for inltn package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:05:31

CallScript END PREINSTALL: inltn at 18:05:31

CallScript START PREINSTALL: inltw at 18:05:33

HOOK: START at 18:05:38

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for inltw package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:05:38

CallScript END PREINSTALL: inltw at 18:05:38

CallScript START PREINSTALL: inmdg at 18:05:40

HOOK: START at 18:05:44

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for inmdg package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:05:44

CallScript END PREINSTALL: inmdg at 18:05:44

CallScript START PREINSTALL: inmhb at 18:05:47

HOOK: START at 18:05:51

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for inmhb package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:05:51

CallScript END PREINSTALL: inmhb at 18:05:51

CallScript START PREINSTALL: innsh at 18:05:53

HOOK: START at 18:05:58

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for innsh package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:05:58

CallScript END PREINSTALL: innsh at 18:05:58

CallScript START PREINSTALL: inrtr at 18:06:00

HOOK: START at 18:06:04

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for inrtr package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:06:04

CallScript END PREINSTALL: inrtr at 18:06:04

CallScript START PREINSTALL: inmgx at 18:06:06

HOOK: START at 18:06:11

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for inmgx package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:06:11

CallScript END PREINSTALL: inmgx at 18:06:11

CallScript START PREINSTALL: inipx at 18:06:13

HOOK: START at 18:06:17

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for inipx package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:06:18

CallScript END PREINSTALL: inipx at 18:06:18

CallScript START PREINSTALL: inswp at 18:06:20

HOOK: START at 18:06:24

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for inswp package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:06:24

CallScript END PREINSTALL: inswp at 18:06:24

CallScript START PREINSTALL: invpr at 18:06:26

HOOK: START at 18:06:31

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for invpr package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:06:31

CallScript END PREINSTALL: invpr at 18:06:31

CallScript START PREINSTALL: invkl at 18:06:33

HOOK: START at 18:06:37

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for invkl package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:06:37

CallScript END PREINSTALL: invkl at 18:06:38

CallScript START PREINSTALL: inccm at 18:06:40

HOOK: START at 18:06:44

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for inccm package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:06:44

CallScript END PREINSTALL: inccm at 18:06:44

CallScript START PREINSTALL: invco at 18:06:46

HOOK: START at 18:06:51

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for invco package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

INFO: Registering the script C:\CSCOpx/dbupdate/common/vpnFilterUpdate.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:06:51

CallScript END PREINSTALL: invco at 18:06:51

CallScript START PREINSTALL: inmng at 18:06:53

HOOK: START at 18:06:57

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for inmng package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:06:57

CallScript END PREINSTALL: inmng at 18:06:57

CallScript START PREINSTALL: invwn at 18:07:00

HOOK: START at 18:07:04

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for invwn package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:07:04

CallScript END PREINSTALL: invwn at 18:07:04

CallScript START PREINSTALL: inons at 18:07:06

HOOK: START at 18:07:11

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for inons package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:07:11

CallScript END PREINSTALL: inons at 18:07:11

CallScript START PREINSTALL: incss at 18:07:13

HOOK: START at 18:07:17

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for incss package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:07:17

CallScript END PREINSTALL: incss at 18:07:17

CallScript START PREINSTALL: innam at 18:07:20

HOOK: START at 18:07:24

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for invwn package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:07:24

CallScript END PREINSTALL: innam at 18:07:24

CallScript START PREINSTALL: inair at 18:07:26

HOOK: START at 18:07:31

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for invwn package

INFO: Registering the script C:\CSCOpx/IDS/inventory/scripts/main.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:07:31

CallScript END PREINSTALL: inair at 18:07:31

CallScript START PREINSTALL: ncf1 at 18:07:33

HOOK: START at 18:07:37

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:07:37

CallScript END PREINSTALL: ncf1 at 18:07:37

CallScript START PREINSTALL: ncf2 at 18:07:40

HOOK: START at 18:07:44

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:07:44

CallScript END PREINSTALL: ncf2 at 18:07:44

CallScript START PREINSTALL: ncf3 at 18:07:46

HOOK: START at 18:07:50

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:07:51

CallScript END PREINSTALL: ncf3 at 18:07:51

CallScript START PREINSTALL: ncf5 at 18:07:53

HOOK: START at 18:07:57

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:07:57

CallScript END PREINSTALL: ncf5 at 18:07:57

CallScript START PREINSTALL: trn1 at 18:07:59

HOOK: START at 18:08:04

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:08:04

CallScript END PREINSTALL: trn1 at 18:08:04

CallScript START PREINSTALL: trn2 at 18:08:06

HOOK: START at 18:08:10

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:08:10

CallScript END PREINSTALL: trn2 at 18:08:10

CallScript START PREINSTALL: trn3 at 18:08:13

HOOK: START at 18:08:17

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:08:17

CallScript END PREINSTALL: trn3 at 18:08:17

CallScript START PREINSTALL: trn4 at 18:08:19

HOOK: START at 18:08:23

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for trn4 package

INFO: Registering the script C:\CSCOpx/IDS/cfgt/scripts/pixdbupdate.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:08:24

CallScript END PREINSTALL: trn4 at 18:08:24

CallScript START PREINSTALL: trn5 at 18:08:26

HOOK: START at 18:08:30

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for trn5 package

INFO: Registering the script C:\CSCOpx/IDS/cfgt/scripts/cssdbupdate.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:08:30

CallScript END PREINSTALL: trn5 at 18:08:30

CallScript START PREINSTALL: cfa1 at 18:08:32

HOOK: START at 18:08:37

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:08:37

CallScript END PREINSTALL: cfa1 at 18:08:37

CallScript START PREINSTALL: cfa2 at 18:08:39

HOOK: START at 18:08:43

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:08:43

CallScript END PREINSTALL: cfa2 at 18:08:44

CallScript START PREINSTALL: cfa3 at 18:08:46

HOOK: START at 18:08:50

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:08:50

CallScript END PREINSTALL: cfa3 at 18:08:50

CallScript START PREINSTALL: cfa4 at 18:08:52

HOOK: START at 18:08:57

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for trn4 package

INFO: Registering the script C:\CSCOpx/IDS/config/scripts/pixdbupdate.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:08:57

CallScript END PREINSTALL: cfa4 at 18:08:57

CallScript START PREINSTALL: cfa5 at 18:08:59

HOOK: START at 18:09:03

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for trn5 package

INFO: Registering the script C:\CSCOpx/IDS/config/scripts/cssdbupdate.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:09:03

CallScript END PREINSTALL: cfa5 at 18:09:03

CallScript START PREINSTALL: sho4 at 18:09:05

HOOK: START at 18:09:10

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for sho4 pix package

INFO: Registering the script C:\CSCOpx/IDS/netshow/scripts/netshow_pix.pl

After preinstall for sho4 pix package

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:09:10

CallScript END PREINSTALL: sho4 at 18:09:10

CallScript START PREINSTALL: sho5 at 18:09:12

HOOK: START at 18:09:16

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for sho5 css package

INFO: Registering the script C:\CSCOpx/IDS/netshow/scripts/netshow_css.pl

After preinstall for sho5 css package

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:09:17

CallScript END PREINSTALL: sho5 at 18:09:17

CallScript START PREINSTALL: swids at 18:09:19

HOOK: START at 18:09:23

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

preinstall for swids package

Registering with ncdbupdate.pl via r03001ncft.txt

INFO: Registering the script C:\CSCOpx/dbupdate/common/ncdbupdate.pl

Registering with nmcsgenericdbupdate.pl via r13001cfgt.txt

INFO: Registering the script C:\CSCOpx/dbupdate/common/nmcsgenericdbupdate.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:09:23

CallScript END PREINSTALL: swids at 18:09:23

***END of preinstall hooks

-----------------DISK SPACE TEST DETAILS---------------

pkg files dirs size disk clusterSize clusters

cas 117 31 497773 C:\ 512 1060

adv_inv 359 87 7020833 C:\ 512 13987

cfgt 107 30 611131 C:\ 512 1281

config 314 46 1997574 C:\ 512 4095

ncfg 109 22 471163 C:\ 512 999

ccli 78 12 337228 C:\ 512 711

ncfa 132 36 1031516 C:\ 512 2118

ncft 33 34 90144 C:\ 512 228

devn 27 15 115141 C:\ 512 254

swim 617 63 8272043 C:\ 512 16531

RMhlp 232 11 4710918 C:\ 512 9328

avail 74 19 1555522 C:\ 512 3094

conx 25 12 165121 C:\ 512 348

sysloga 244 62 21518555 C:\ 512 42222

show 158 37 1247009 C:\ 512 2556

invc 47 20 250065 C:\ 512 533

sc 37 12 251324 C:\ 512 522

invrp 48 18 333229 C:\ 512 693

edit 203 18 847023 C:\ 512 1772

rvpn 173 46 878685 C:\ 512 1847

dee 18 14 106699 C:\ 512 234

mib 34 14 1570874 C:\ 512 3100

inbdv 4 8 4586 C:\ 512 19

incsv 4 8 6247 C:\ 512 22

incts 5 8 7201 C:\ 512 24

intsi 5 8 6379 C:\ 512 23

inctn 4 8 10498 C:\ 512 31

incat 5 8 36690 C:\ 512 82

incom 4 8 9847 C:\ 512 30

incon 4 8 13476 C:\ 512 37

infhb 4 8 7335 C:\ 512 25

infrw 4 8 8161 C:\ 512 26

infsw 5 8 7244 C:\ 512 25

infsm 5 8 12359 C:\ 512 35

inisw 5 8 12643 C:\ 512 35

inlsw 5 8 27312 C:\ 512 63

inltn 6 8 21337 C:\ 512 54

inltw 4 8 5072 C:\ 512 20

inmdg 4 8 5514 C:\ 512 21

inmhb 4 8 4433 C:\ 512 19

innsh 5 8 6294 C:\ 512 23

inrtr 5 8 82868 C:\ 512 173

inmgx 4 8 15991 C:\ 512 41

inipx 4 8 26808 C:\ 512 62

inswp 4 8 8393 C:\ 512 26

invpr 4 8 9354 C:\ 512 29

invkl 4 8 8822 C:\ 512 27

inccm 4 8 5910 C:\ 512 22

invco 5 11 22057 C:\ 512 58

inmng 5 11 4338 C:\ 512 22

invwn 4 8 5119 C:\ 512 21

inons 4 8 26616 C:\ 512 62

incss 5 11 5027 C:\ 512 24

innam 4 8 4751 C:\ 512 19

inair 5 11 37167 C:\ 512 86

ncf1 36 27 237267 C:\ 512 508

ncf2 24 21 131127 C:\ 512 290

ncf3 14 16 76562 C:\ 512 170

ncf5 14 16 86160 C:\ 512 191

trn1 7 14 121799 C:\ 512 254

trn2 5 14 95742 C:\ 512 204

trn3 4 13 64369 C:\ 512 140

trn4 4 15 61803 C:\ 512 137

trn5 6 17 77490 C:\ 512 171

cfa1 5 4 5642 C:\ 512 18

cfa2 4 11 6490 C:\ 512 26

cfa3 5 11 9146 C:\ 512 32

cfa4 7 7 9289 C:\ 512 30

cfa5 8 14 15655 C:\ 512 50

sho1 4 7 4932 C:\ 512 19

sho2 4 7 4249 C:\ 512 17

sho3 4 7 3713 C:\ 512 16

sho4 3 4 4392 C:\ 512 14

sho5 3 4 4790 C:\ 512 15

swids 6 7 102841 C:\ 512 210

------------- ADDITIONAL SPACE REQUIREMENTS -----------

disk id size files clusters

C:\ C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\ 5242880 100 10340

-------- Disk Space Totals (clusters)---------

disk cluster required available

C:\ 512 121651 3652678

MAIN: ProcessBeforeDiskSpaceCheck END at 18:09:26

MAIN: ProcessBeforeDataMove START at 18:09:26

Info: Copyout Manifest file C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\copyout.txt not found, no copyout requests

Copying Dependency Handler

CreateVersionFile: file created.

InstallNonPackageFiles: copying C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\version to C:\CSCOpx\conf\version

InstallNonPackageFiles: release.txt not copied; file does not exist.

InstallNonPackageFiles: DfCcoMsg not copied; file does not exist.

InstallNonPackageFiles: copying D:\nonpack.ini to C:\CSCOpx\setup\nonpack.ini

MAIN: CallTocHooks START cleaning at 18:09:34

Executing CLEANING hooks

CallScript START rmeclean at 18:09:34

CallScript START UNINSTALL: nsys at 18:09:38

CallScript END UNINSTALL: nsys at 18:09:38

getting property UNINSTALLCMD from property list ..., not found

getting property UNINSTALLCMD from C:\CSCOpx\setup\nsys.info..., not found

getting property ROOTDIR from property list ..., not found

getting property ROOTDIR from C:\CSCOpx\setup\nsys.info..., not found

CallScript START UNINSTALL: cwim at 18:09:38

CallScript END UNINSTALL: cwim at 18:09:38

getting property UNINSTALLCMD from property list ..., not found

getting property UNINSTALLCMD from C:\CSCOpx\setup\cwim.info..., not found

getting property ROOTDIR from property list ..., not found

getting property ROOTDIR from C:\CSCOpx\setup\cwim.info..., not found

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

END of removing nsys 3.3

CallScript END rmeclean at 18:09:38

MAIN: CallTocHooks END cleaning at 18:09:38

Running CMF Enable Engine with -INSTALL System

Executing as LSAW.cmd:

C:\CSCOpx\bin\perl.exe -IC:\CSCOpx\objects\perl5\lib C:\CSCOpx\conf\cmf\bin\CMFEnable.pl -INSTALL System

Executing command:

/x /c "C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\LSAW.cmd" > C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\stdout.txt 2>&1

-----CMF configuration protocol

INFO: CMFEnable.pl: wantSystem=1; wantNetwork=1

INFO: a datasource with the name cmf was already present. It will be preserved.

Starting database engine cmfEng

Stopping database engine cmfEng

C:\CSCOpx\databases\cmf\cmf.db is in Sybase Adaptive Server Anywhere format.

C:\CSCOpx\objects\db\conf\configureApp.pl installing userinfo application.

INFO: [EnableAndDisableBundles] will SystemEnable::Enable

ProcCall: Start to enable system service...

INFO: a datasource with the name ani was already present. It will be preserved.

Starting database engine aniEng

Stopping database engine aniEng

C:\CSCOpx\databases\ani\ani.db is in Sybase Adaptive Server Anywhere format.

ProcRetn: ...Done enabling system service.

INFO: [EnableAndDisableBundles] will NetworkEnable::Enable

----- end of CMF configuration protocol

MAIN: ProcessBeforeDataMove END at 18:11:29

MAIN: MoveFileData START at 18:11:29

MAIN: Selecting packages and merging filelists START at 18:11:31

MAIN: Selecting packages and merging filelists END at 18:11:35

MAIN: MoveFileData END at 18:12:17

MAIN: ProcessAfterDataMove START at 18:12:18

***Executing postinstall hooks

CallScript START POSTINSTALL: cas at 18:12:18

HOOK: START at 18:12:21

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

getting property VERSION from property list ..., found: 3.4

getting property VERSION from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\cas.info..., done

getting property PATCHVER from property list ..., found: 0

getting property PATCHVER from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\cas.info..., done

getting property INSTDATE from property list ..., found: 11-30-2002 18:01:58

getting property INSTDATE from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\cas.info..., done

getting property PREV_VERSION from property list ..., found: 3.3

getting property PREV_VERSION from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\cas.info..., done

getting property PREV_PATCHVER from property list ..., found: 0

getting property PREV_PATCHVER from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\cas.info..., done

Executing as LSAW.cmd:

C:\CSCOpx\bin\perl.exe -IC:\CSCOpx\objects\perl5\lib C:\CSCOpx\objects\db\conf\configureApp.pl action=install app=cas

Executing command:

/x /c "C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\LSAW.cmd"

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:12:26

CallScript END POSTINSTALL: cas at 18:12:27

CallScript START POSTINSTALL: adv_inv at 18:12:27

HOOK: START at 18:12:30

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

getting property bInstallingPkgFirstTime from property list ..., found: NO

getting property bInstallingPkgFirstTime from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\adv_inv.info..., done

setting property DBSERVICE_LONGNAME=Essentials into property List ..., adding property done

setting property DBSERVICE_LONGNAME=Essentials into C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\adv_inv.info..., done

getting property VERSION from property list ..., found: 3.4

getting property VERSION from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\adv_inv.info..., done

getting property PATCHVER from property list ..., found: 0

getting property PATCHVER from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\adv_inv.info..., done

getting property INSTDATE from property list ..., found: 11-30-2002 18:01:58

getting property INSTDATE from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\adv_inv.info..., done

getting property PREV_VERSION from property list ..., found: 3.3

getting property PREV_VERSION from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\adv_inv.info..., done

getting property PREV_PATCHVER from property list ..., found: 0

getting property PREV_PATCHVER from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\adv_inv.info..., done

Executing as LSAW.cmd:

C:\CSCOpx\bin\perl.exe -IC:\CSCOpx\objects\perl5\lib C:\CSCOpx\objects\db\conf\configureDb.pl action=upgrade dsn=rme

Executing command:

/x /c "C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\LSAW.cmd" > C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\RmeDbInstall.txt 2>&1

-----check and upgrade databases

ProcRetn: [StandardDbUpgrade] 107

----- end of check and upgrade databases

Executing as LSAW.cmd:

C:\CSCOpx\bin\perl.exe -IC:\CSCOpx\objects\perl5\lib C:\CSCOpx\objects\db\conf\configureDb.pl action=reg dsn=rme dmprefix=Essentials

Executing command:

/x /c "C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\LSAW.cmd" > C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\RmeDbRegister.txt 2>&1

-----Essentials DB Registration

INFO: a datasource with the name rme was already present. It will be preserved.

WARNING: DBservice properties already exist for datasource rme; These will be replaced

Starting database engine rmeEng

Stopping database engine rmeEng

C:\CSCOpx\databases\rme\rme.db is in Sybase Adaptive Server Anywhere format.

----- end of Essentials DB Registration

Executing as LSAW.cmd:

C:\CSCOpx\bin\perl.exe -IC:\CSCOpx\objects\perl5\lib C:\CSCOpx\objects\db\conf\configureOdbc.pl rme

Executing command:

/x /c "C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\LSAW.cmd" > C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\RmeOdbcInstall.txt 2>&1

-----RME ODBC.TMPL configured

INFO: configuring ODBC succeeded for rme.

----- end of RME ODBC.TMPL configured

INFO: User did not opt to change the password.

INFO: Setting default password to RME database.

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:13:26

CallScript END POSTINSTALL: adv_inv at 18:13:26

CallScript START POSTINSTALL: cfgt at 18:13:26

HOOK: START at 18:13:29

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:13:29

CallScript END POSTINSTALL: cfgt at 18:13:29

CallScript START POSTINSTALL: config at 18:13:29

HOOK: START at 18:13:33

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

loading property file C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties.orig, file not found

setting property ARCHIVE_DIR=C:/CSCOpx/files/archive into property List ..., adding property done

setting property ARCHIVE_DIR=C:/CSCOpx/files/archive into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties.orig..., done

setting property SHADOW_CONFIG_DIR=C:/CSCOpx/files/archive/shadow into property List ..., adding property done

setting property SHADOW_CONFIG_DIR=C:/CSCOpx/files/archive/shadow into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties.orig..., done

setting property DEBUG_LEVEL=0 into property List ..., adding property done

setting property DEBUG_LEVEL=0 into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties.orig..., done

setting property REPORT_PAGE_LENGTH=100 into property List ..., adding property done

setting property REPORT_PAGE_LENGTH=100 into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties.orig..., done

setting property MAX_UPDATE_THREADS=5 into property List ..., adding property done

setting property MAX_UPDATE_THREADS=5 into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties.orig..., done

setting property BROWSE_TIMEOUT=120 into property List ..., adding property done

setting property BROWSE_TIMEOUT=120 into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties.orig..., done

setting property USE_NAT=No into property List ..., adding property done

setting property USE_NAT=No into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties.orig..., done

setting property USER_FIELD=3 into property List ..., adding property done

setting property USER_FIELD=3 into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties.orig..., done

getting property ARCHIVE_DIR from property list ..., found: C:/CSCOpx/files/archive

getting property ARCHIVE_DIR from C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties..., done

getting property SHADOW_CONFIG_DIR from property list ..., found: C:/CSCOpx/files/archive/shadow

getting property SHADOW_CONFIG_DIR from C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties..., done

getting property VERSION from property list ..., found: 3.4

getting property VERSION from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\config.info..., done

getting property PATCHVER from property list ..., found: 0

getting property PATCHVER from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\config.info..., done

getting property INSTDATE from property list ..., found: 11-30-2002 18:01:58

getting property INSTDATE from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\config.info..., done

getting property PREV_VERSION from property list ..., found: 3.3

getting property PREV_VERSION from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\config.info..., done

getting property PREV_PATCHVER from property list ..., found: 0

getting property PREV_PATCHVER from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\config.info..., done

Executing as LSAW.cmd:

cacls "archDir" /T /E /G casuser:F /R bin

Executing command:

/x /c "C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\LSAW.cmd"

setting property ARCHIVE_DIR=C:/CSCOpx/files/archive into property List ...,, already set

setting property ARCHIVE_DIR=C:/CSCOpx/files/archive into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties..., done

setting property SHADOW_CONFIG_DIR=C:/CSCOpx/files/archive/shadow into property List ...,, already set

setting property SHADOW_CONFIG_DIR=C:/CSCOpx/files/archive/shadow into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties..., done

setting property DEBUG_LEVEL=0 into property List ...,, already set

setting property DEBUG_LEVEL=0 into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties..., done

setting property REPORT_PAGE_LENGTH=100 into property List ...,, already set

setting property REPORT_PAGE_LENGTH=100 into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties..., done

setting property MAX_UPDATE_THREADS=5 into property List ...,, already set

setting property MAX_UPDATE_THREADS=5 into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties..., done

setting property BROWSE_TIMEOUT=120 into property List ...,, already set

setting property BROWSE_TIMEOUT=120 into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties..., done

setting property USE_NAT=No into property List ..., adding property done

setting property USE_NAT=No into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties..., done

setting property USER_FIELD=3 into property List ..., adding property done

setting property USER_FIELD=3 into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties..., done

setting property APPLID104=Configuration Archive into property List ...,, already set

setting property APPLID104=Configuration Archive into C:\CSCOpx\www\classpath\com\cisco\nm\cmf\appName.properties..., done

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:14:18

CallScript END POSTINSTALL: config at 18:14:18

CallScript START POSTINSTALL: ncfg at 18:14:18

HOOK: START at 18:14:21

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property servlet.com.cisco.nm.config.cjm.jobmanager.JobManagerServlet.code=com.cisco.nm.config.cjm.jobmanager.JobManagerServlet into property List ...,, already set

setting property servlet.com.cisco.nm.config.cjm.jobmanager.JobManagerServlet.code=com.cisco.nm.config.cjm.jobmanager.JobManagerServlet into C:\CSCOpx\lib\jrun\jsm-cw2000\services\jse\properties\servlets.properties..., done

setting property servlet.com.cisco.nm.config.cjm.jobmanager.JobManagerServlet.args= into property List ...,, already set

setting property servlet.com.cisco.nm.config.cjm.jobmanager.JobManagerServlet.args= into C:\CSCOpx\lib\jrun\jsm-cw2000\services\jse\properties\servlets.properties..., done

setting property servlet.com.cisco.nm.config.cjm.jobmanager.JobManagerServlet.preload=true into property List ...,, already set

setting property servlet.com.cisco.nm.config.cjm.jobmanager.JobManagerServlet.preload=true into C:\CSCOpx\lib\jrun\jsm-cw2000\services\jse\properties\servlets.properties..., done

setting property JRMInterface=com.cisco.nm.config.cjm.downloader.ArchiveJRMInterface.class into property List ...,, already set

setting property JRMInterface=com.cisco.nm.config.cjm.downloader.ArchiveJRMInterface.class into C:\CSCOpx\www\classpath\com\cisco\nm\config\archive\config.properties..., done

setting property CJM=com/cisco/nm/config/cjm/catalog/cjmCat.properties into property List ...,, already set

setting property CJM=com/cisco/nm/config/cjm/catalog/cjmCat.properties into C:\CSCOpx\www\classpath\com\cisco\nm\cmf\util\catalog\catalog.properties..., done

Executing as LSAW.cmd:

C:\CSCOpx\bin\perl.exe -IC:\CSCOpx\objects\perl5\lib C:\CSCOpx\objects\db\conf\configureApp.pl action=install app=cjm

Executing command:

/x /c "C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\LSAW.cmd" > C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\check_cjm_jobs.txt 2>&1

-----Install Backup for cjm

C:\CSCOpx\objects\db\conf\configureApp.pl installing cjm application.

----- end of Install Backup for cjm

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:14:26

CallScript END POSTINSTALL: ncfg at 18:14:26

CallScript START POSTINSTALL: ccli at 18:14:26

HOOK: START at 18:14:31

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property diffapi=0 into property List ..., adding property done

setting property diffapi=0 into C:\CSCOpx\www\classpath\com\cisco\nm\cmf\debug.properties..., done

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:14:31

CallScript END POSTINSTALL: ccli at 18:14:32

CallScript START POSTINSTALL: ncfa at 18:14:32

HOOK: START at 18:14:35

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property NetConfig=com/cisco/nm/config/netconfig/catalog/netconfigCat.properties into property List ...,, already set

setting property NetConfig=com/cisco/nm/config/netconfig/catalog/netconfigCat.properties into C:\CSCOpx\www\classpath\com\cisco\nm\cmf\util\catalog\catalog.properties..., done

Executing as LSAW.cmd:

C:\CSCOpx\bin\perl.exe -IC:\CSCOpx\objects\perl5\lib C:\CSCOpx\objects\db\conf\configureApp.pl action=install app=netconfig

Executing command:

/x /c "C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\LSAW.cmd" > C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\check_netconfig_jobs.txt 2>&1

-----Install Backup for netconfig

C:\CSCOpx\objects\db\conf\configureApp.pl installing netconfig application.

----- end of Install Backup for netconfig

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:14:40

CallScript END POSTINSTALL: ncfa at 18:14:40

CallScript START POSTINSTALL: ncft at 18:14:40

HOOK: START at 18:14:43

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:14:43

CallScript END POSTINSTALL: ncft at 18:14:43

CallScript START POSTINSTALL: swim at 18:14:43

HOOK: START at 18:14:46

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

getting property VERSION from property list ..., found: 3.3

getting property VERSION from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\swim.info..., done

getting property PATCHVER from property list ..., found: 0

getting property PATCHVER from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\swim.info..., done

getting property INSTDATE from property list ..., found: 11-30-2002 18:02:00

getting property INSTDATE from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\swim.info..., done

getting property PREV_VERSION from property list ..., found: 3.3

getting property PREV_VERSION from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\swim.info..., done

getting property PREV_PATCHVER from property list ..., found: 0

getting property PREV_PATCHVER from C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\setup\swim.info..., done

Executing as LSAW.cmd:

C:\CSCOpx\bin\perl.exe -IC:\CSCOpx\objects\perl5\lib C:\CSCOpx\objects\db\conf\configureApp.pl action=install app=swim

Executing command:

/x /c "C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\LSAW.cmd" > C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\swim_backup_manifest.txt 2>&1

-----Install Backup for swim

C:\CSCOpx\objects\db\conf\configureApp.pl installing swim application.

----- end of Install Backup for swim

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:14:52

CallScript END POSTINSTALL: swim at 18:14:52

CallScript START POSTINSTALL: avail at 18:14:52

HOOK: START at 18:14:55

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:14:55

CallScript END POSTINSTALL: avail at 18:14:55

CallScript START POSTINSTALL: sysloga at 18:14:55

HOOK: START at 18:14:58

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:14:58

CallScript END POSTINSTALL: sysloga at 18:14:59

CallScript START POSTINSTALL: show at 18:14:59

HOOK: START at 18:15:02

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:02

CallScript END POSTINSTALL: show at 18:15:02

CallScript START POSTINSTALL: edit at 18:15:02

HOOK: START at 18:15:05

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property 302.cdlClass=com.cisco.nm.config.cfgedit.ConfigEditorCDLInterface into property List ..., adding property done

setting property 302.cdlClass=com.cisco.nm.config.cfgedit.ConfigEditorCDLInterface into C:\CSCOpx\www\classpath\com\cisco\nm\config\cjm\downloader\downloader.properties..., done

setting property ConfigEditor=com/cisco/nm/config/cfgedit/catalog/cfgeditCat.properties into property List ...,, already set

setting property ConfigEditor=com/cisco/nm/config/cfgedit/catalog/cfgeditCat.properties into C:\CSCOpx\www\classpath\com\cisco\nm\cmf\util\catalog\catalog.properties..., done

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:05

CallScript END POSTINSTALL: edit at 18:15:05

CallScript START POSTINSTALL: rvpn at 18:15:05

HOOK: START at 18:15:09

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:09

CallScript END POSTINSTALL: rvpn at 18:15:09

CallScript START POSTINSTALL: ncf1 at 18:15:09

HOOK: START at 18:15:12

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:12

CallScript END POSTINSTALL: ncf1 at 18:15:12

CallScript START POSTINSTALL: ncf2 at 18:15:12

HOOK: START at 18:15:15

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:15

CallScript END POSTINSTALL: ncf2 at 18:15:15

CallScript START POSTINSTALL: ncf3 at 18:15:15

HOOK: START at 18:15:19

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:19

CallScript END POSTINSTALL: ncf3 at 18:15:19

CallScript START POSTINSTALL: ncf5 at 18:15:19

HOOK: START at 18:15:22

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:22

CallScript END POSTINSTALL: ncf5 at 18:15:22

CallScript START POSTINSTALL: trn1 at 18:15:22

HOOK: START at 18:15:26

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:26

CallScript END POSTINSTALL: trn1 at 18:15:26

CallScript START POSTINSTALL: trn2 at 18:15:26

HOOK: START at 18:15:29

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:29

CallScript END POSTINSTALL: trn2 at 18:15:29

CallScript START POSTINSTALL: trn3 at 18:15:29

HOOK: START at 18:15:32

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:32

CallScript END POSTINSTALL: trn3 at 18:15:32

CallScript START POSTINSTALL: trn4 at 18:15:32

HOOK: START at 18:15:36

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:36

CallScript END POSTINSTALL: trn4 at 18:15:36

CallScript START POSTINSTALL: trn5 at 18:15:36

HOOK: START at 18:15:39

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:39

CallScript END POSTINSTALL: trn5 at 18:15:39

CallScript START POSTINSTALL: cfa1 at 18:15:39

HOOK: START at 18:15:42

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:42

CallScript END POSTINSTALL: cfa1 at 18:15:42

CallScript START POSTINSTALL: cfa2 at 18:15:42

HOOK: START at 18:15:46

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:46

CallScript END POSTINSTALL: cfa2 at 18:15:46

CallScript START POSTINSTALL: cfa3 at 18:15:46

HOOK: START at 18:15:49

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:49

CallScript END POSTINSTALL: cfa3 at 18:15:49

CallScript START POSTINSTALL: cfa4 at 18:15:49

HOOK: START at 18:15:52

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:52

CallScript END POSTINSTALL: cfa4 at 18:15:52

CallScript START POSTINSTALL: cfa5 at 18:15:52

HOOK: START at 18:15:56

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:56

CallScript END POSTINSTALL: cfa5 at 18:15:56

CallScript START POSTINSTALL: sho4 at 18:15:56

HOOK: START at 18:15:59

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:15:59

CallScript END POSTINSTALL: sho4 at 18:15:59

CallScript START POSTINSTALL: sho5 at 18:15:59

HOOK: START at 18:16:02

Info: CopyNewFiles from C:\CSCOpx\setup\support to C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP1.DIR\

Info: CopyNewFiles copies resetCasuser.exe

Info: CopyNewFiles copies secure.dll

Info: CopyNewFiles copies swimDir.pl

setting property PRODUCT_NAME=CiscoWorks2000 into property List ..., adding property done

setting property SHORT_PRODUCT_NAME=CW2000 into property List ..., adding property done

setting property REGISTRY_ROOT=SOFTWARE\Cisco\Resource Manager\CurrentVersion into property List ..., adding property done

setting property VENDOR=Cisco Systems into property List ..., adding property done

setting property LOG_FILE_NAME=cw2000_in020.log into property List ..., adding property done

setting property REBOOT=OFF into property List ..., adding property done

setting property RUN_DMGR=ON into property List ..., adding property done

setting property ABORT=OFF into property List ..., adding property done

HOOK: END at 18:16:02

CallScript END POSTINSTALL: sho5 at 18:16:02

***END of postinstall hooks

---------- DB Update --------------

INFO:have 46 requests for dbupdate

Executing as LSAW.cmd:

C:\CSCOpx\bin\perl.exe -IC:\CSCOpx\objects\perl5\lib C:\CSCOpx\dbupdate\dbupdate.pl C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\dbupdate.temp

Executing command:

/x /c "C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\LSAW.cmd" > C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\stdout.txt 2>&1

-----Database Upgrade Protocol

Directory C:\CSCOpx/conf/rigel/rme will be processed

=====================================================

=====================================================

Updating schema From File: c:\cscopx/conf/rigel/rme/rme_schemachanges.sql

=====================================================

Loading Device Groups

Beginning label processing

Opening C:\CSCOpx/bgupgrade/CmfUpgrade.log for logging

Starting Syslog Analyzer upgrade...

Syslog Analyzer upgrade done

Connected to Db Successfully...

Executing the insert statement...

Finished Inserting data into Table Slg_If from Dev_IF

Directory C:\CSCOpx/IDS/inventory/desfiles/mib will be processed

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/basicdevice_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/cat1700_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/cat2600_ibm_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/cat2600_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/cat3900_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/catalyst_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/ccm_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/combinet_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/fasthub_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/fastswitch_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/fastswitch_wmod_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/iosswitch_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/l2l3switch_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/ls2020_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/madge_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/nashoba_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/optical_switch_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/router_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/strata_axis_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/strata_switch_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/viper_kal_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/viper_mibset.des

=====================================================

=====================================================

Updating Mibsets From File: c:\cscopx/ids/inventory/desfiles/mib/vpnconc_mibset.des

=====================================================

Loading Device Groups

Beginning label processing

=====================================================

Updating Device UI Labels From File: c:\cscopx/ids/inventory/desfiles/mib/uilabel.des

=====================================================

Directory C:\CSCOpx/IDS/inventory/desfiles/basicdevice will be processed

=====================================================

Loading Device Groups

Dev Class Id = 1 for Class Name = Generic SNMP

=====================================================

Updating Device Types and device views For Class: Generic SNMP

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/basicdevice/basicdevice_devtype.des,Generic SNMP)

=====================================================

Updating MibsetUsage For Class: Generic SNMP

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/cat1700 will be processed

=====================================================

Loading Device Groups

Dev Class Id = 10 for Class Name = Cisco Catalyst 1700 Switch

=====================================================

Updating Device Types and device views For Class: Cisco Catalyst 1700 Switch

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/cat1700/cat1700_devtype.des,Cisco Catalyst 1700 Switch)

=====================================================

Updating MibsetUsage For Class: Cisco Catalyst 1700 Switch

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/cat2600 will be processed

=====================================================

Loading Device Groups

Dev Class Id = 12 for Class Name = Cisco Catalyst 2600 Switch

=====================================================

Updating Device Types and device views For Class: Cisco Catalyst 2600 Switch

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/cat2600/cat2600_devtype.des,Cisco Catalyst 2600 Switch)

=====================================================

Updating MibsetUsage For Class: Cisco Catalyst 2600 Switch

=====================================================

=====================================================

Updating Serial Number Mapping For Class: Cisco Catalyst 2600 Switch

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/cat2600_ibm will be processed

=====================================================

Loading Device Groups

Dev Class Id = 13 for Class Name = Cisco Catalyst 2600 OEM Switch

=====================================================

Updating Device Types and device views For Class: Cisco Catalyst 2600 OEM Switch

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/cat2600_ibm/cat2600_ibm_devtype.des,Cisco Catalyst 2600 OEM Switch)

=====================================================

Updating MibsetUsage For Class: Cisco Catalyst 2600 OEM Switch

=====================================================

=====================================================

Updating Serial Number Mapping For Class: Cisco Catalyst 2600 OEM Switch

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/cat3900 will be processed

=====================================================

Loading Device Groups

Dev Class Id = 14 for Class Name = Cisco Catalyst 3900 Switch

=====================================================

Updating Device Types and device views For Class: Cisco Catalyst 3900 Switch

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/cat3900/cat3900_devtype.des,Cisco Catalyst 3900 Switch)

=====================================================

Updating MibsetUsage For Class: Cisco Catalyst 3900 Switch

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/catalyst will be processed

=====================================================

Loading Device Groups

Dev Class Id = 8 for Class Name = Cisco Catalyst Switch

=====================================================

Updating Device Types and device views For Class: Cisco Catalyst Switch

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/catalyst/catalyst_devtype.des,Cisco Catalyst Switch)

=====================================================

Updating MibsetUsage For Class: Cisco Catalyst Switch

=====================================================

=====================================================

Updating Serial Number Mapping For Class: Cisco Catalyst Switch

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/combinet will be processed

=====================================================

Loading Device Groups

Dev Class Id = 3 for Class Name = Cisco Router 700 Series

=====================================================

Updating Device Types and device views For Class: Cisco Router 700 Series

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/combinet/combinet_devtype.des,Cisco Router 700 Series)

=====================================================

Updating MibsetUsage For Class: Cisco Router 700 Series

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/concentrator will be processed

=====================================================

Loading Device Groups

Dev Class Id = 18 for Class Name = Cisco WG Concentrator

=====================================================

Updating Device Types and device views For Class: Cisco WG Concentrator

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/concentrator/concentrator_devtype.des,Cisco WG Concentrator)

=====================================================

Updating MibsetUsage For Class: Cisco WG Concentrator

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/fasthub will be processed

=====================================================

Loading Device Groups

Dev Class Id = 19 for Class Name = Cisco FastHub

=====================================================

Updating Device Types and device views For Class: Cisco FastHub

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/fasthub/fasthub_devtype.des,Cisco FastHub)

=====================================================

Updating MibsetUsage For Class: Cisco FastHub

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/firewall will be processed

=====================================================

Loading Device Groups

Dev Class Id = 26 for Class Name = Cisco Firewall

=====================================================

Updating Device Types and device views For Class: Cisco Firewall

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/firewall/firewall_devtype.des,Cisco Firewall)

=====================================================

Updating MibsetUsage For Class: Cisco Firewall

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/fastswitch will be processed

=====================================================

Loading Device Groups

Dev Class Id = 4 for Class Name = Cisco FastSwitch

=====================================================

Updating Device Types and device views For Class: Cisco FastSwitch

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/fastswitch/fastswitch_devtype.des,Cisco FastSwitch)

=====================================================

Updating MibsetUsage For Class: Cisco FastSwitch

=====================================================

=====================================================

Updating Serial Number Mapping For Class: Cisco FastSwitch

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/fastswitch_wmod will be processed

=====================================================

Loading Device Groups

Dev Class Id = 5 for Class Name = Cisco FastSwitch With Module

=====================================================

Updating Device Types and device views For Class: Cisco FastSwitch With Module

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/fastswitch_wmod/fastswitch_wmod_devtype.des,Cisco FastSwitch With Module)

=====================================================

Updating MibsetUsage For Class: Cisco FastSwitch With Module

=====================================================

=====================================================

Updating Serial Number Mapping For Class: Cisco FastSwitch With Module

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/iosswitch will be processed

=====================================================

Loading Device Groups

Dev Class Id = 25 for Class Name = Cisco Catalyst IOS Switch

=====================================================

Updating Device Types and device views For Class: Cisco Catalyst IOS Switch

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/iosswitch/iosswitch_devtype.des,Cisco Catalyst IOS Switch)

=====================================================

Updating MibsetUsage For Class: Cisco Catalyst IOS Switch

=====================================================

=====================================================

Updating Serial Number Mapping For Class: Cisco Catalyst IOS Switch

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/l2l3switch will be processed

=====================================================

Loading Device Groups

Dev Class Id = 23 for Class Name = Cisco Catalyst L2L3 Switch

=====================================================

Updating Device Types and device views For Class: Cisco Catalyst L2L3 Switch

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/l2l3switch/l2l3switch_devtype.des,Cisco Catalyst L2L3 Switch)

=====================================================

Updating MibsetUsage For Class: Cisco Catalyst L2L3 Switch

=====================================================

=====================================================

Updating Serial Number Mapping For Class: Cisco Catalyst L2L3 Switch

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/ls1010 will be processed

=====================================================

Loading Device Groups

Dev Class Id = 15 for Class Name = Cisco LS100 Switch

=====================================================

Updating Device Types and device views For Class: Cisco LS100 Switch

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/ls1010/ls100_devtype.des,Cisco LS100 Switch)

=====================================================

Updating MibsetUsage For Class: Cisco LS100 Switch

=====================================================

Dev Class Id = 16 for Class Name = Cisco LS1010 Switch

=====================================================

Updating Device Types and device views For Class: Cisco LS1010 Switch

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/ls1010/ls1010_devtype.des,Cisco LS1010 Switch)

=====================================================

Updating MibsetUsage For Class: Cisco LS1010 Switch

=====================================================

=====================================================

Updating Serial Number Mapping For Class: Cisco LS1010 Switch

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/ls2020 will be processed

=====================================================

Loading Device Groups

Dev Class Id = 17 for Class Name = Cisco LS2020 Switch

=====================================================

Updating Device Types and device views For Class: Cisco LS2020 Switch

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/ls2020/ls2020_devtype.des,Cisco LS2020 Switch)

=====================================================

Updating MibsetUsage For Class: Cisco LS2020 Switch

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/madge will be processed

=====================================================

Loading Device Groups

Dev Class Id = 9 for Class Name = Cisco Catalyst 1600 Switch

=====================================================

Updating Device Types and device views For Class: Cisco Catalyst 1600 Switch

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/madge/madge_devtype.des,Cisco Catalyst 1600 Switch)

=====================================================

Updating MibsetUsage For Class: Cisco Catalyst 1600 Switch

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/microhub will be processed

=====================================================

Loading Device Groups

Dev Class Id = 20 for Class Name = Cisco MicroHub

=====================================================

Updating Device Types and device views For Class: Cisco MicroHub

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/microhub/microhub_devtype.des,Cisco MicroHub)

=====================================================

Updating MibsetUsage For Class: Cisco MicroHub

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/nashoba will be processed

=====================================================

Loading Device Groups

Dev Class Id = 11 for Class Name = Cisco Catalyst 1800 Switch

=====================================================

Updating Device Types and device views For Class: Cisco Catalyst 1800 Switch

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/nashoba/nashoba_devtype.des,Cisco Catalyst 1800 Switch)

=====================================================

Updating MibsetUsage For Class: Cisco Catalyst 1800 Switch

=====================================================

=====================================================

Updating Serial Number Mapping For Class: Cisco Catalyst 1800 Switch

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/router will be processed

=====================================================

Loading Device Groups

Dev Class Id = 2 for Class Name = Cisco Router

=====================================================

Updating Device Types and device views For Class: Cisco Router

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/router/router_devtype.des,Cisco Router)

NOT SUPPORTED

NOT SUPPORTED

NOT SUPPORTED

=====================================================

Updating MibsetUsage For Class: Cisco Router

=====================================================

=====================================================

Updating Serial Number Mapping For Class: Cisco Router

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/strata_axis will be processed

=====================================================

Loading Device Groups

Dev Class Id = 21 for Class Name = Cisco MGX

=====================================================

Updating Device Types and device views For Class: Cisco MGX

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/strata_axis/strata_axis_devtype.des,Cisco MGX)

=====================================================

Updating MibsetUsage For Class: Cisco MGX

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/strata_switch will be processed

=====================================================

Loading Device Groups

Dev Class Id = 22 for Class Name = Cisco IPX/IGX/BPX

=====================================================

Updating Device Types and device views For Class: Cisco IPX/IGX/BPX

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/strata_switch/strata_switch_devtype.des,Cisco IPX/IGX/BPX)

=====================================================

Updating MibsetUsage For Class: Cisco IPX/IGX/BPX

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/switchprobe will be processed

=====================================================

Loading Device Groups

Dev Class Id = 24 for Class Name = Cisco Switch Probe

=====================================================

Updating Device Types and device views For Class: Cisco Switch Probe

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/switchprobe/switchprobe_devtype.des,Cisco Switch Probe)

=====================================================

Updating MibsetUsage For Class: Cisco Switch Probe

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/viper will be processed

=====================================================

Loading Device Groups

Dev Class Id = 6 for Class Name = Cisco Catalyst EtherSwitch

=====================================================

Updating Device Types and device views For Class: Cisco Catalyst EtherSwitch

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/viper/viper_devtype.des,Cisco Catalyst EtherSwitch)

=====================================================

Updating MibsetUsage For Class: Cisco Catalyst EtherSwitch

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/viper_kal will be processed

=====================================================

Loading Device Groups

Dev Class Id = 7 for Class Name = Cisco Catalyst KalpanaSwitch

=====================================================

Updating Device Types and device views For Class: Cisco Catalyst KalpanaSwitch

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/viper_kal/viper_kal_devtype.des,Cisco Catalyst KalpanaSwitch)

=====================================================

Updating MibsetUsage For Class: Cisco Catalyst KalpanaSwitch

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/call_manager will be processed

=====================================================

Loading Device Groups

Dev Class Id = 27 for Class Name = Cisco Call Manager

=====================================================

Updating Device Types and device views For Class: Cisco Call Manager

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/call_manager/ccm_devtype.des,Cisco Call Manager)

=====================================================

Updating MibsetUsage For Class: Cisco Call Manager

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/vpnconc will be processed

=====================================================

Loading Device Groups

Dev Class Id = 28 for Class Name = Cisco VPN 3000 Concentrators

=====================================================

Updating Device Types and device views For Class: Cisco VPN 3000 Concentrators

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/vpnconc/vpnconc_devtype.des,Cisco VPN 3000 Concentrators)

=====================================================

Updating MibsetUsage For Class: Cisco VPN 3000 Concentrators

=====================================================

Beginning label processing

INFO: Updating DB to add new information.

INFO: vpnFilterUpdate.pl: Finished adding data to DB.

Directory C:\CSCOpx/IDS/inventory/desfiles/mengine will be processed

=====================================================

Loading Device Groups

Dev Class Id = 29 for Class Name = Cisco Management Engines

=====================================================

Updating Device Types and device views For Class: Cisco Management Engines

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/mengine/mengine_devtype.des,Cisco Management Engines)

=====================================================

Updating MibsetUsage For Class: Cisco Management Engines

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/winserver will be processed

=====================================================

Loading Device Groups

Dev Class Id = 30 for Class Name = Windows Server

=====================================================

Updating Device Types and device views For Class: Windows Server

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/winserver/winserver_devtype.des,Windows Server)

=====================================================

Updating MibsetUsage For Class: Windows Server

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/optical_switch will be processed

=====================================================

Loading Device Groups

Dev Class Id = 33 for Class Name = Cisco Optical Switches

=====================================================

Updating Device Types and device views For Class: Cisco Optical Switches

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/optical_switch/optical_switch_devtype.des,Cisco Optical Switches)

=====================================================

Updating MibsetUsage For Class: Cisco Optical Switches

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/css will be processed

=====================================================

Loading Device Groups

Dev Class Id = 31 for Class Name = Cisco Content Service Switch

=====================================================

Updating Device Types and device views For Class: Cisco Content Service Switch

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/css/css_devtype.des,Cisco Content Service Switch)

=====================================================

Updating MibsetUsage For Class: Cisco Content Service Switch

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/nam will be processed

=====================================================

Loading Device Groups

Dev Class Id = 34 for Class Name = Cisco Network Analysis Module

=====================================================

Updating Device Types and device views For Class: Cisco Network Analysis Module

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/nam/nam_devtype.des,Cisco Network Analysis Module)

=====================================================

Updating MibsetUsage For Class: Cisco Network Analysis Module

=====================================================

Beginning label processing

Directory C:\CSCOpx/IDS/inventory/desfiles/aironet will be processed

=====================================================

Loading Device Groups

Dev Class Id = 32 for Class Name = Cisco Aironet

=====================================================

Updating Device Types and device views For Class: Cisco Aironet

=====================================================

Calling loadDevTypes(C:\CSCOpx/IDS/inventory/desfiles/aironet/aironet_devtype.des,Cisco Aironet)

=====================================================

Updating MibsetUsage For Class: Cisco Aironet

=====================================================

Beginning label processing

dbAddConfigCategories: category 4 already exists.

dbAddConfigCategoryMapping: category 4 to Cisco Firewall mapping already exists.

dbAddClassPollVars: Cisco firewall entry already exists.

dbAddConfigCategories: category 4 already exists.

dbAddConfigCategoryMapping: category 4 to Cisco Firewall mapping already exists.

INFO: Logging Messages into C:\CSCOpx/IDS/logs/sho4-pix.log

INFO: Logging Messages into C:\CSCOpx/IDS/logs/sho5-css.log

Opening C:\CSCOpx/dbupdate/CSCOdbupdate.log for logging

Starting database engine rmeEng

Stopping database engine rmeEng

----- end of Database Upgrade Protocol

-----Database Upgrade Log File

Beginning DB Update

Start C:\CSCOpx\dbupdate\dbupdate.pl : At C:\CSCOpx\dbupdate\dbupdate.pl, #45: Time - 2002/11/30 18:16:03

Starting DB ...: Time - 2002/11/30 18:16:03

DSN PRoperties: rmeEng: At C:/CSCOpx/dbupdate/dbupdateutils.pl, #119: Time - 2002/11/30 18:16:03

Executing - StartDb(DSN=rme): At C:/CSCOpx/dbupdate/dbupdateutils.pl, #132: Time - 2002/11/30 18:16:03

DSNs Used = rme, .: At C:/CSCOpx/dbupdate/dbupdateutils.pl, #139: Time - 2002/11/30 18:16:13

Processing Registry entry 0 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/conf/rigel/rme,rmeschemaUpgrade: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:13

Processing Registry entry 1 = rme^C:\CSCOpx/conf/bg2rigel/rme/scripts/m05000sa.pl^: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:30

Processing Registry entry 2 = rme^C:\CSCOpx/dbupdate/common/m05001sa.pl^dsn=rme: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:30

Processing Registry entry 3 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/mib,CSCOmib: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:35

Processing Registry entry 4 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/basicdevice,CSCOinbdv: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:44

Processing Registry entry 5 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/cat1700,CSCOincsv: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:45

Processing Registry entry 6 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/cat2600,CSCOincts: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:45

Processing Registry entry 7 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/cat2600_ibm,CSCOintsi: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:46

Processing Registry entry 8 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/cat3900,CSCOinctn: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:47

Processing Registry entry 9 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/catalyst,CSCOincat: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:48

Processing Registry entry 10 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/combinet,CSCOincom: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:49

Processing Registry entry 11 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/concentrator,CSCOincon: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:51

Processing Registry entry 12 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/fasthub,CSCOinfhb: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:52

Processing Registry entry 13 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/firewall,CSCOinfrw: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:53

Processing Registry entry 14 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/fastswitch,CSCOinfsw: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:54

Processing Registry entry 15 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/fastswitch_wmod,CSCOinfsm: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:55

Processing Registry entry 16 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/iosswitch,CSCOinisw: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:56

Processing Registry entry 17 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/l2l3switch,CSCOinlsw: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:57

Processing Registry entry 18 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/ls1010,CSCOinltn: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:58

Processing Registry entry 19 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/ls2020,CSCOinltw: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:16:59

Processing Registry entry 20 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/madge,CSCOinmdg: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:00

Processing Registry entry 21 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/microhub,CSCOinmhb: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:01

Processing Registry entry 22 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/nashoba,CSCOinnsh: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:01

Processing Registry entry 23 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/router,CSCOinrtr: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:02

Processing Registry entry 24 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/strata_axis,CSCOinmgx: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:08

Processing Registry entry 25 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/strata_switch,CSCOinipx: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:09

Processing Registry entry 26 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/switchprobe,CSCOinswp: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:10

Processing Registry entry 27 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/viper,CSCOinvpr: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:11

Processing Registry entry 28 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/viper_kal,CSCOinvkl: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:12

Processing Registry entry 29 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/call_manager,CSCOinccm: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:13

Processing Registry entry 30 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/vpnconc,CSCOinvco: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:13

Processing Registry entry 31 = rme^C:\CSCOpx/dbupdate/common/vpnFilterUpdate.pl^DSN=rme: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:14

Processing Registry entry 32 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/mengine,CSCOinmng: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:15

Processing Registry entry 33 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/winserver,CSCOinvwn: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:16

Processing Registry entry 34 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/optical_switch,CSCOinons: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:16

Processing Registry entry 35 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/css,CSCOincss: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:17

Processing Registry entry 36 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/nam,CSCOinnam: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:18

Processing Registry entry 37 = rme^C:\CSCOpx/IDS/inventory/scripts/main.pl^dsn=rme,C:\CSCOpx/IDS/inventory/desfiles/aironet,CSCOinair: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:19

Processing Registry entry 38 = rme^C:\CSCOpx/IDS/cfgt/scripts/pixdbupdate.pl^dsn=rme: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:20

Processing Registry entry 39 = rme^C:\CSCOpx/IDS/cfgt/scripts/cssdbupdate.pl^dsn=rme: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:21

Processing Registry entry 40 = rme^C:\CSCOpx/IDS/config/scripts/pixdbupdate.pl^dsn=rme: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:21

Processing Registry entry 41 = rme^C:\CSCOpx/IDS/config/scripts/cssdbupdate.pl^dsn=rme: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:22

Processing Registry entry 42 = rme^C:\CSCOpx/IDS/netshow/scripts/netshow_pix.pl^dsn=rme: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:22

Processing Registry entry 43 = rme^C:\CSCOpx/IDS/netshow/scripts/netshow_css.pl^dsn=rme: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:24

Processing Registry entry 44 = rme^C:\CSCOpx/dbupdate/common/ncdbupdate.pl^dsn=rme: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:26

Processing Registry entry 45 = rme^C:\CSCOpx/dbupdate/common/nmcsgenericdbupdate.pl^dsn=rme: At C:\CSCOpx\dbupdate\dbupdate.pl, #89: Time - 2002/11/30 18:17:27

----- end of Database Upgrade Log File

INFO: no results available from dbupdate

License for rme, installed 1, on CD 1, versionComp 2, action 3

MAIN: ProcessAfterDataMove END at 18:17:40

local Administrators group is Administrators

Executing as LSAW.cmd:

echo y|C:\WINNT\System32\cacls.exe "C:\CSCOpx\databases\rme\orig" /T /G Administrators:F casusers:F

echo y|C:\WINNT\System32\cacls.exe "C:\CSCOpx\databases\rme\orig" /T /G Administrators:F casusers:F

echo y|C:\WINNT\System32\cacls.exe "C:\CSCOpx\files" /T /G Administrators:F casusers:F

Executing command:

/x /c "C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\LSAW.cmd" > C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\filePerm.txt 2> C:\DOCUME~1\Siemens\LOCALS~1\Temp\_ISTMP5.DIR\_ISTMP0.DIR\filePermEr.txt

-----File Permissions Errors Protocol

----- File Permissions Errors Protocol is empty

MAIN: CleanUpInstall START at 18:17:52

No suites to import data from RME

Info: cmf postinstall skipped

Executing FINAL hooks

Starting Daemon Manager

MESSAGE

StartService: Control ID not found.

MAIN: Installation complete at 18:18:21

Blue

Re: CiscoWorks 2000

-----File Permissions Errors Protocol

----- File Permissions Errors Protocol is empty

shows at the end which does not indicate much. It'll be better if you contact TAC to troubleshoot this further.

172
Views
0
Helpful
6
Replies