CiscoWorks does not work with 4006 series switches OR Supervisor III engine
I have 2 4006 switches, and each has a Supervisor III module installed. The appropriate SNMP community strings are set along with logging parameters. I have found that Cisco Works cannot manage the Supervisor III module and Campus Manager cannot manage the layer II functions. User Tracking does not display any hosts learned from the CAM table, and Topology Services does not accurately display the switches within the network.
I am running IOS 12.1 on the Sup III
I have Cisco Works 2000 with the latest patches running on Windows 2000.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...