We've bought CW Campus + RWAN. During installations those products i have some misunderstanding and question:
1) For complite installation both products, after installing Common Services and RME, Campus and other software from ManagLANSolution, I have to install only ACL manager and Perfomane manager from RWAN bundle, don't I?
2) Anybody know how to enable CDP protocol on poinit-to-point ATM links? Core of our networks consist from c7206 routers, connected together over ATM cloud (RFC1577 IP over ATM routed encapsulation with OSPF routing beetwen them). How result - CDP continuity is broken, and Topology Services cann't build integrity map of our network.
For 1), the installation order is listed in the respective Install Guides. CD-One/Common Services must be installed first which is requires by all CW2K apps, other applications can be installed in any order except for ACL Manager which requires that RME be installed first. Also, you don't need to install the apps which you do not plan to use.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...