DFM keeps reporting ResourceException even though we have more than enough RAM on all our Switches and Routers. All our Switches have 64MB DRAM and 16MB of FLash. Is it a software error or do we need to upgrade the RAM and Flash. Also, if we do, what are the recommndations for Catalyst 6509, 4000, and 3600 routers.
Have you installed the DFM 1.1 IDS 1.1.2 patch from CCO?. If not, go ahead and install it first. This is more likely due to a DFM issue rather than switch issue. Hopefully, the DFM IDS patch should fix this problem.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...