Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

ciscoworks2k :How to upgrade the device type in campus manager

Hi all, Campus manager dicovers all my device BUT I've 3 WS-C2950G-48-EI switches and capus manager sees these as "CiscoProduct.429" instead as C2950G-48.

How can I upgrade ?

thx

1 ACCEPTED SOLUTION

Accepted Solutions

Re: ciscoworks2k :How to upgrade the device type in campus manag

Hi,

before installing IDU v.3.0 for Campus, you must install the update for CMF 2.1; You see CMF 2.1 enabled because it is installed and you are using it (the same with CM 3.2).As with Campus, you also must install an IDU for CMF. The name of the package is: CMF21.IDU.v3-0.win.exe and you can download it from: http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-campus

The problem is, that you must install the IDU for CMF before installing the one for CM.

regards,

Martin

5 REPLIES
Blue

Re: ciscoworks2k :How to upgrade the device type in campus manag

What is the Campus Manager version?

New Member

Re: ciscoworks2k :How to upgrade the device type in campus manag

Campus Manager 3.2

Blue

Re: ciscoworks2k :How to upgrade the device type in campus manag

You need to install IDU 3.0 for Campus Manager 3.2 from: http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-campus which will add support for this and other new hardware as listed in: http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/camp_mgr/sup_dev/cm_3_2.htm

New Member

Re: ciscoworks2k :How to upgrade the device type in campus manag

Thanks, But on installation of IDU3.0 I get the following error :"please instal common management foundation 2.1 IDU 3.0 before install CM IDU3.0"

But On About the server-tab I see that common management foundation 2.1 is enabled. What can I do ?

Re: ciscoworks2k :How to upgrade the device type in campus manag

Hi,

before installing IDU v.3.0 for Campus, you must install the update for CMF 2.1; You see CMF 2.1 enabled because it is installed and you are using it (the same with CM 3.2).As with Campus, you also must install an IDU for CMF. The name of the package is: CMF21.IDU.v3-0.win.exe and you can download it from: http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-campus

The problem is, that you must install the IDU for CMF before installing the one for CM.

regards,

Martin

100
Views
1
Helpful
5
Replies
CreatePlease to create content