Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Class-Based-Qos Mib and 12.1 IOS Not Working

I have configured CBWFQ on a 2610 router running 12.1.19 IOS. However when I do a mib walk I do not get any statistics returned for the Class-Based-QoS mib. When I check on-line it appears that the mib was supported in 12.0 code and later. Why am I not seeing it? I have triple checked the configuration and all appears fine.

1 ACCEPTED SOLUTION

Accepted Solutions
Blue

Re: Class-Based-Qos Mib and 12.1 IOS Not Working

Using CCO MIB Locator Tool (http://www.cisco.com/go/mibs), c2600-ds-mz.121-19.bin does not contain Class-Based-QoS mib. This is a IP/IPX/AT/DEC PLUS image.

5 REPLIES
Blue

Re: Class-Based-Qos Mib and 12.1 IOS Not Working

You first may want to check using the CCO MIB Locator Tool (http://www.cisco.com/gom/mibs), whether this particular MIB is present in the IOS image running on this 2610 or not.

Community Member

Re: Class-Based-Qos Mib and 12.1 IOS Not Working

Says in 12.1.2(E) it is available in the 12.1 series. Does that mean it is not included in mainline release?

Blue

Re: Class-Based-Qos Mib and 12.1 IOS Not Working

What is the IOS image name that shows up in the 'sh ver' output of this 2610?

Community Member

Re: Class-Based-Qos Mib and 12.1 IOS Not Working

I'm sorry to ask a basic IOS type of question but I was going under the assumption that something incorporated in early 12.1 code when we are running 12.1(19) would have been incorporated by now. My apologies.

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-DS-M), Version 12.1(19), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Tue 04-Mar-03 07:53 by kellythw

Image text-base: 0x80008088, data-base: 0x80E14C9C

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

DUMPSMARTS uptime is 23 hours, 26 minutes

System returned to ROM by reload at 14:54:38 EDT Mon Apr 14 2003

System restarted at 14:56:35 EDT Mon Apr 14 2003

System image file is "flash:c2600-ds-mz.121-19.bin"

Blue

Re: Class-Based-Qos Mib and 12.1 IOS Not Working

Using CCO MIB Locator Tool (http://www.cisco.com/go/mibs), c2600-ds-mz.121-19.bin does not contain Class-Based-QoS mib. This is a IP/IPX/AT/DEC PLUS image.

152
Views
0
Helpful
5
Replies
CreatePlease to create content