Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

class-map/policy-maps

@all...

Can i apply class-map in both inbound/outbound, or is it restricted to outbound only. whereas for policy-map i understand it can be applied either in or out bound... correct me if i am wrong

put in simple words, should the class-map be applied only in outbound only to be effective????

ta

hanu

1 REPLY
Silver

Re: class-map/policy-maps

Class-maps are not applied to interfaces. They only classify/identify traffic.

Class-maps go in a Policy-map, which defines your policy, and then a service policy is applied to the interface that applies your policy to the interface in or out.

As for being effective, in or out, it is totally dependant on what you are trying to accomplish.

The following link shows some Voice class-map type configuration on FR. Hope this helps.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121limit/121e/121e2/vofvip/vofr2vip.htm

Regards,

Don

86
Views
0
Helpful
1
Replies
CreatePlease login to create content