Can someone explain to me why every so often we have to clear EIGRP tables to allow Routers the ability to communciate with each other. This happens once in a while whereby 3 Routers share a common LAN and one Routers needs to clear EIGRP. All have common K Values and AS.
Can you explain what the problem is? Are the two routers not forming an EIGRP neighbor relationship, not trading routes, etc? Start with a show ip eigrp neighbor when the routers are in this condition. Does it show the right neighbors, and what are the SRTT and RTO values? Can you ping the neighbors, and if you ping 18.104.22.168, do you get a response from those neighbors?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...