Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Clear static mac address from 3750 12.2(35)SE2

hi all,

can anyone let me know how can i clear static mac address entries from my switch stack. These address have come of from dot1x configured ports and now their is no pc connected to port. I tried setting interface to default still the old addressess are binded to it. How can i clear static mac address entries from the table?

3 REPLIES

Re: Clear static mac address from 3750 12.2(35)SE2

Please check the link below and read the section about sticky mac adresses:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/port_sec.html#wp1057168

regards,

Leo

New Member

Re: Clear static mac address from 3750 12.2(35)SE2

hi,

the addresses in my table are not configured. They appear bcoz i've configured dot1x on the interface and after pc authenticates they are shown as static. I tried all the options but unable to clear them so far. :(

Re: Clear static mac address from 3750 12.2(35)SE2

In that case: clear dot1x

To clear 802.1X interface information, use the clear dot1x command in privileged EXEC mode.

clear dot1x {all | interface interface-name}

http://www.cisco.com/en/US/products/ps6922/products_command_reference_chapter09186a008069c0fe.html#wp1010369

Leo

2079
Views
0
Helpful
3
Replies