Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

clockrate

how can I detect the real clockrate of a serial WIC on a 3620

configured as DTE with X.21 DTE Cable ?

2 REPLIES
Gold

Re: clockrate

If you do a 'show controller' on a physical serial interface, included among the return data should be a line indicating the cable type and received clockrate. Here is an example:

Router#show controller Serial0/0

M4T: show controller:

PAS unit 0, subunit 0, f/w version 1-45, rev ID 0x2800001, version 3

idb = 0x6245AC6C, ds = 0x6245C974, ssb=0x6245CC4C

Clock mux=0x0, ucmd_ctrl=0xC, port_status=0x74

Serial config=0x8, line config=0x200

maxdgram=1608, bufpool=48Kb, 31 particles

DCD=up DSR=up DTR=up RTS=up CTS=up

line state: up

cable type : V.35 DTE cable, received clockrate 56000

[ more output cut ]

New Member

Re: clockrate

this is not the the output of a 3620 with a serial WIC with

a connected X.21 DTE.

97
Views
0
Helpful
2
Replies