cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
290
Views
0
Helpful
2
Replies

clockrate

beac.kunkelwo
Level 1
Level 1

how can I detect the real clockrate of a serial WIC on a 3620

configured as DTE with X.21 DTE Cable ?

2 Replies 2

jasyoung
Level 7
Level 7

If you do a 'show controller' on a physical serial interface, included among the return data should be a line indicating the cable type and received clockrate. Here is an example:

Router#show controller Serial0/0

M4T: show controller:

PAS unit 0, subunit 0, f/w version 1-45, rev ID 0x2800001, version 3

idb = 0x6245AC6C, ds = 0x6245C974, ssb=0x6245CC4C

Clock mux=0x0, ucmd_ctrl=0xC, port_status=0x74

Serial config=0x8, line config=0x200

maxdgram=1608, bufpool=48Kb, 31 particles

DCD=up DSR=up DTR=up RTS=up CTS=up

line state: up

cable type : V.35 DTE cable, received clockrate 56000

[ more output cut ]

this is not the the output of a 3620 with a serial WIC with

a connected X.21 DTE.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: