Re: Combing vlans over link bwtween 2 catalyst 6509
Are you trying to bridge the VLANs together. In other words, are you trying to make VLAN 1 and VLAN 2 the same broadcast domain. If you just connect a port from each switch together from each VLAN, you will effectively bridge the VLANs together. You will need to turn off CDP as it will complain of a Native VLAN mismatch.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...