Compatible fiber module for 4507r-e, supervisor 6-e

[Akenfoo12]

Currently I got chassis: Cisco Catalyst 4507r-e with supervisor engine 6-e. I looking fiber module, 12/24 ports. Any solutions?

[Leo Laohoo]

Go HERE.  Because you have a Sup6 supervisor card, you should be looking for 45XX and 46XX line cards.  Your best candidate would be the WS-X4612-SFP-E or WS-X4624-SFP-E.

The list of supported line cards for Sup6 can be found in Tables 9 & 10.  

Please be aware of the minimum required IOS level.

[Akenfoo12]

Hi Leo,

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/hardware/configuration/notes/OL_25315.html

From the link, WS-x4624-SFP-E only supported by supervisor engine 7-E.

And WS-X4612-SFP-E only supported by chassis 4507R+E, mine is 4507R-E. I  not sure whether still compatible or not. 

[Leo Laohoo]

From the link, WS-x4624-SFP-E only supported by supervisor engine 7-E.

Read THIS.  This is taken from the Sup6E Release Notes of IOS version 12.2(54)SGx and 12.2(53)SGx.  Table 5 shows what line cards are supported and the minimum IOS requirements.  

And WS-X4612-SFP-E only supported by chassis 4507R+E, mine is 4507R-E.

The line card is supported on all 4500 "E" chassis.