Hello. I have a customer that has a Cisco 3620 with T1/ISDN PRI module and 24 digital modem module at the main site. The customer needs to a) connect outbound from the main site to two remote Cisco 802r ISDN BRI routers (sometimes simultaneously), and b) connect from servers on the main site LAN via DialOut EZ software (modem sharing) to up to eight (8) remote-site PCs. The customer has one PRI ISDN circuit installed at the main site. The remote sites will not be dialing the main site, only the reverse (main site to remote). There is no dial-up requirement to the main site. I have not been able to find similar configurations, however have developed my own using Dialer Profiles. This config is not known to work. If anyone has anything similar, or would be willing to review my work, I would really appreciate it.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.