I need to configure compression for Frame-Relay and ISDN links between a Cisco 7500 and non-Cisco devices. I´ve found some information on CCO stating that no compression standard can be applied yet although efforts are being made. Is this right? Is there any solution at present to make compression interoperate between Cisco and non-Cisco devices and particularly for Frame-Relay links and ISDN links?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...