Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Concentrating DSL on Cisco 3600??

Hi,

I read that 3600 is usually used for let's say larger branch office do access the central office via 6000 concentrator for example, but my question is: is it possible to make the 3600 act as a DSL concentrator, meaning is there way to accept several DSL connections to 3600

Thanks

2 REPLIES
Cisco Employee

Re: Concentrating DSL on Cisco 3600??

YES..You are right. you can use the 3600 with ATM T1/E1/T3 network modules to terminate the dsl connections..Basically you can use it as dsl aggregator.

Here is the place who discuss that.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t5/atm_ima.htm

http://lbj/push_targets1/ucdit/cc/td/doc/product/access/acs_mod/cis3600/3600_cn/bearcat.htm

New Member

Re: Concentrating DSL on Cisco 3600??

Thanks you for response, that really helps. But here is the whole situation. The county where I work for an ISP has no ATM network at all. Meaning our telco does not offer ATM services at all. Since I'm new to DSL technology, I need some more info on wether it can be done (using 3600 as DSL concentrator) without the need from the telco offering ATM. I hope you understand my question and if not I will be glad to explain in more detail.

Thanks

Velimir

81
Views
0
Helpful
2
Replies