09-18-2006 06:38 PM - edited 03-03-2019 05:06 AM
[1] Can someone tell me the difference between the config register value of 0x2102 and 0x2102.
[2] Where to find the meaning of all the config-registers from Cisco Doc ?
Thank you,
- sn -
Solved! Go to Solution.
09-18-2006 06:55 PM
Sanjay,
The below document should address questions around Config-registers.
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a008022493f.shtml
I hope it helps.
Regards,
Arul
09-18-2006 06:55 PM
Sanjay,
The below document should address questions around Config-registers.
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a008022493f.shtml
I hope it helps.
Regards,
Arul
09-18-2006 08:49 PM
Hi Sanjay,
The config register setting is used to change the router behavior in how to boot and options to used while booting like ignore configuration, disable boot messages
0x2102 - factory default settings for config reg
This tells the router should attempt to load a Cisco IOS? software image from Flash memory and load the startup configuration with a console speed of 9600 baud.
few main settings
0x2100 - ROM MONITOR
0x2101 - Boots in ROM
0x2142 - Password recovery; ignores NVRAM Config file
Hope this Helps
Thanks,
Raj
09-18-2006 08:55 PM
Hi
You can download Boson ConfregCalculater
This is good tool for reference.
http://www.boson.com/FreeUtilities.html
Pls rate all posts
Regards
JD
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: