Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Config Report - Display wont fit the screen!

This is very odd and has to have a simple explanation.

If I bring up a configuration report, the java screen appears fine except the inforation in the window does not fit. If you maximise the window there is still information outside the window. You could suggest my sreen resolution is too small, but it's set at 1280*1024.

My Java version is 1.3.1_07

Take a look at the config screen.bmp.

Thanks,

Dave

3 REPLIES

Re: Config Report - Display wont fit the screen!

Hi Dave,

the best way to work around this problem would be to close all browser windows, uninstall your current Java Version, reopen your browser delete the cache and login to CW2k again. If you try to open an application you should be prompted to install the correct Java Version which resides on your CW2k server. With this version all should be ok.

regards,

Martin

Blue

Re: Config Report - Display wont fit the screen!

Not sure what RME version is this, but if you're using the latest 3.5, then you can install the Update-1 patch which will add support for the new Java Plug-in 1.4.1_02, to see if this help. Screen shot looks to be a plug-in related problem.

New Member

Re: Config Report - Display wont fit the screen!

Thanks guys!

I will try both your solutions. I didn't realise there was a patch, I'll look into this. At the moment the java version are giving me problems due to the versions used by CW2K and NNM.

181
Views
0
Helpful
3
Replies
CreatePlease login to create content