Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

configuration of catalyst 2960G

How can i configure the VLAN into Catalyst 2960G

2 REPLIES
Silver

Re: configuration of catalyst 2960G

There are lots of information in Cisco web. Please try to search the suitable one for you. Below is the link for the configuration.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2960/12225see/scg/index.htm

Hope this helps.

Re: configuration of catalyst 2960G

Hi

Use the follwoing commands

config t

(config)#vlan 1

(config-vlan)#name

(config)#vlan 2

(config-vlan)#name

Assign ports on the switch to the VLAN using the switchport command and your are done.

Make sure you have a Layer 3 device for inter vlan connectivity.

HTH

Narayan

324
Views
0
Helpful
2
Replies
CreatePlease login to create content