Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

configure 2621

A interface fastethernet 0/1 (ip:210.37.16.1)of router 2621 link to a switch with 4 vlan ,another interface f0/0 (ip:210.37.29.1)link to the center switch .

how to configure 2621?

2 REPLIES

Re: configure 2621

Am trying hard to understand what you want to configure the 2621 for ? Please elaborate...Are you planning to route between subnets, vlans ??

New Member

Re: configure 2621

there was a net . as follows :

-------the switchA --------------

vlan 4:166.0.16.254/24 | __|____|____|__--|----------(hosta:166.0.16.5/24)

vlan 3:166.0.17.254/24 | __|____|____|__--|----------(hostb:166.0.17.5/24)

vlan 2:166.0.18.254/24 | __|____|____|__--|----------(hostc:166.0.18.5/24)

vlan 1:166.0.19.2/28 | *_|

|ip:166.0.19.2/28

|

___|ip:166.0.19.200/28

[ center switch ]

the switchA create 4 vlans .a port in vlan 4 link directly the center switch .

the swtichA is a part of net.

now I want to add a router 2621 betwteen the swtichA and the center switch .

i do as follow :

in switchA :

1¡¢ip defaute-gateway 166.0.16.1 255.255.255.240

2¡¢(*) the port add the vlan 4

in 2621:

interface FastEthernet0/0

ip address 166.0.16.1 255.255.255.240

ip address 166.0.19.1 255.255.255.0

ip default-gateway 166.0.19.200

access-list 101 permit ip any any

is it correct?

thanks.

98
Views
0
Helpful
2
Replies
CreatePlease to create content